參數資料
型號: MCP2050T-500E/MQ
廠商: Microchip Technology
文件頁數: 5/42頁
文件大?。?/td> 0K
描述: IC TXRX LIN 5.0V LDO 20-QFN
產品培訓模塊: Microchip MCP20xx LIN Transceiver Overview
標準包裝: 3,300
系列: *
2012 Microchip Technology Inc.
DS22299B-page 13
MCP2050
FIGURE 1-12:
VOLTAGE REGULATOR OUTPUT ON OVER CURRENT SITUATION
1.6
Optional External Protection
1.6.1
REVERSE BATTERY PROTECTION
An external reverse-battery-blocking diode should be
used to provide polarity protection (see Figure 1-14).
1.6.2
TRANSIENT VOLTAGE
PROTECTION (LOAD DUMP)
An external 43V transient suppressor (TVS) diode,
between VBB and ground, with a transient protection
resistor (RTP) in series with the battery supply and the
VBB pin protects the device from power transients and
ESD events greater than 43V (see Figure 1-14). The
maximum value for the RTP protection resistor depends
on two parameters: the minimum voltage the part will
start at, and the impacts of this RTP resistor on the VBB
value, thus on the Bus recessive level and slopes.
This leads to a set of three equations to fullfil.
Equation 1-1 provides a max RTP value according to
the minimum battery voltage the user wants the part to
start at.
Equation 1-2 provides a max RTP value according to
the maximum error on the recessive level thus VBB
since the part uses VBB as the reference value for the
recessive level.
Equation 1-3 provides a max RTP value according to
the maximum relative variation the user can accept on
the slope when IREG varies.
Since both Equation 1-1 and Equation 1-2 must be
fulfilled, the maximum allowed value for RTP is thus the
smaller of the two values found when solving
Usually Equation 1-1 gives the higher constraint
(smaller value) for RTP as shown in the following
example where VBATmin is 8V.
However, the user needs to check that the value found
with Equation 1-1 also fulfills Equation 1-2 and
While this protection is optional, it should be
considered as good engineering practice.
Note 1: IREG less than llim, regulator on.
2: After IOUT exceeds llim, voltage regulator output will be reduced until
voltage regulator shutdown voltage VSD is reached.
VSD
0
(1)
(2)
t
0
t
llim
IREG
mA
VREG
V
VREG-NOM
1
2
3
4
5
6
相關PDF資料
PDF描述
VE-J6H-MW-F4 CONVERTER MOD DC/DC 52V 100W
MS27474T14B5S CONN RCPT 5POS JAM NUT W/SCKT
MCP2050T-330E/MQ IC TXRX LIN 3.3V LDO 20-QFN
VE-J6B-MW-F2 CONVERTER MOD DC/DC 95V 100W
MS27505E15B5P CONN RCPT 5POS BOX MNT W/PINS
相關代理商/技術參數
參數描述
MCP-20-I9-LL 制造商:YAMAICHI 制造商全稱:Yamaichi Electronics Co., Ltd. 功能描述:MatchCon
MCP-20-TI9-LL 制造商:YAMAICHI 制造商全稱:Yamaichi Electronics Co., Ltd. 功能描述:MatchCon
MCP-210-00005-01 制造商:Supermicro Computer Inc 功能描述:SPARE PARTS - Trays
MCP-210-00007-01 制造商:Supermicro Computer Inc 功能描述:1U, COMPLETE LCD BEZEL ASM, BLACK, SC813'S, SC815'S - Bulk
MCP-210-00009-01 制造商:Supermicro Computer Inc 功能描述:FRONT BEZEL FOR SYS-6015P-TRB BLACK W/LCD DISPLAY - Bulk