• 參數(shù)資料
    型號: MC68HC05P18ACDW
    廠商: FREESCALE SEMICONDUCTOR INC
    元件分類: 微控制器/微處理器
    英文描述: 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28
    封裝: SOIC-28
    文件頁數(shù): 117/130頁
    文件大?。?/td> 1310K
    代理商: MC68HC05P18ACDW
    EEPROM
    EEPROM Programming Register
    MC68HC05P18A
    Technical Data
    EEPROM
    NON-DISCLOSURE
    AGREEMENT
    REQUIRED
    In byte erase mode, only the selected byte is erased. In block mode,
    a 32-byte block of EEPROM is erased. The EEPROM memory space
    is divided into four 32-byte blocks ($140–$15F, $160–$17F,
    $180–$19F, $1A0–$1BF), and doing a block erase to any address
    within a block erases the entire block. In bulk erase mode, the entire
    128-byte EEPROM section is erased.
    LATCH — EEPROM Programming Latch Bit
    When set, LATCH configures the EEPROM address and data bus for
    programming. When LATCH is set, writes to the EEPROM array
    cause the data bus and the address bus to be latched. This bit is
    readable and writable, but reads from the array are inhibited if the
    LATCH bit is set and a write to the EEPROM space has taken place.
    When clear, address and data buses are configured for normal
    operation. Reset clears this bit.
    EERC — EEPROM RC Oscillator Control Bit
    When this bit is set, the EEPROM section uses the internal RC
    oscillator instead of the CPU clock. The RC oscillator is shared with
    the analog-to-digital (A/D) converter, so this bit should be set by the
    user when the internal bus frequency is below 1.5 MHz to guarantee
    reliable operation of the EEPROM or A/D converter. After setting the
    EERC bit, delay a time, tRCON, to allow the RC oscillator to stabilize.
    This bit is readable and writable. The EERC bit is cleared by reset.
    The RC oscillator is disabled while the MCU is in stop mode.
    EEPGM — EEPROM Programming Power Enable Bit
    EEPGM must be written to enable (or disable) the EEPGM function.
    When set, EEPGM turns on the charge pump and enables the
    programming (or erasing) power to the EEPROM array. When clear,
    this power is switched off. This enables pulsing of the programming
    voltage to be controlled internally. This bit can be read at any time, but
    can only be written to if LATCH = 1. If LATCH is not set, EEPGM
    cannot be set. LATCH and EEPGM cannot both be set with one write
    if LATCH is cleared. EEPGM is cleared automatically when LATCH is
    cleared. Reset clears this bit.
    F
    re
    e
    sc
    a
    le
    S
    e
    m
    ic
    o
    n
    d
    u
    c
    to
    r,
    I
    Freescale Semiconductor, Inc.
    For More Information On This Product,
    Go to: www.freescale.com
    n
    c
    ..
    .
    相關PDF資料
    PDF描述
    MC68HC05P18ACP 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP28
    MC68HC05P18AMP 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP28
    MC68HC05P18ADWE 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28
    MC68HC05P18ADWR3 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28
    MC68HC05P18ACDWR3 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28
    相關代理商/技術參數(shù)
    參數(shù)描述
    MC68HC05P18ACP 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
    MC68HC05P18ADW 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
    MC68HC05P18AMDW 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
    MC68HC05P18AMP 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
    MC68HC05P18AP 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit