參數資料
型號： MC68HC05LJ5P
廠商： FREESCALE SEMICONDUCTOR INC
元件分類： 微控制器/微處理器
英文描述： 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP16
封裝： PLASTIC, DIP-16
文件頁數： 17/85頁
文件大?。?/td> 899K
代理商： MC68HC05LJ5P
GENERAL RELEASE SPECIFICATION
November 10, 1998
MOTOROLA
CENTRAL PROCESSING UNIT
MC68HC05LJ5
3-2
REV 1
3.2
ACCUMULATOR (A)
The accumulator is a general purpose 8-bit register as shown in Figure 3-1. The
CPU uses the accumulator to hold operands and results of arithmetic calculations
or non-arithmetic operations. The accumulator is not affected by a reset of the
device.
3.3
INDEX REGISTER (X)
The index register shown in Figure 3-1 is an 8-bit register that can perform two
functions:
Indexed addressing
Temporary storage
In indexed addressing with no offset, the index register contains the low byte of
the operand address, and the high byte is assumed to be $00. In indexed
addressing with an 8-bit offset, the CPU nds the operand address by adding the
index register content to an 8-bit immediate value. In indexed addressing with a
16-bit offset, the CPU nds the operand address by adding the index register
content to a 16-bit immediate value.
The index register can also serve as an auxiliary accumulator for temporary
storage. The index register is not affected by a reset of the device.
3.4
STACK POINTER (SP)
The stack pointer shown in Figure 3-1 is a 16-bit register. In MCU devices with
memory space less than 64k-bytes the unimplemented upper address lines are
ignored. The stack pointer contains the address of the next free location on the
stack. During a reset or the reset stack pointer (RSP) instruction, the stack pointer
is set to $00FF. The stack pointer is then decremented as data is pushed onto the
stack and incremented as data is pulled off the stack.
When accessing memory, the ten most signicant bits are permanently set to
0000000011. The six least signicant register bits are appended to these ten xed
bits to produce an address within the range of $00FF to $00C0. Subroutines and
interrupts may use up to 64($C0) locations. If 64 locations are exceeded, the
stack pointer wraps around and overwrites the previously stored information. A
subroutine call occupies two locations on the stack and an interrupt uses ve
locations.
3.5
PROGRAM COUNTER (PC)
The program counter shown in Figure 3-1 is a 16-bit register. In MCU devices
with memory space less than 64k-bytes the unimplemented upper address lines
are ignored. The program counter contains the address of the next instruction or
operand to be fetched.
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
..
.
相關PDF資料
PDF描述
MC68HC05P15DW 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28
MC68HC05P18ACDW 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28
MC68HC05P18ACP 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP28
MC68HC05P18AMP 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP28
MC68HC05P18ADWE 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28
相關代理商/技術參數
參數描述
MC68HC05M6 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:microcomputer unit with VFD drive capacity
MC68HC05M9 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:microcomputer unit with VFD drive capability
MC68HC05P1 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
MC68HC05P15 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:SPECIFICATION
MC68HC05P18 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Advance Information
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*