參數資料
型號: MC68HC05J5DW
廠商: MOTOROLA INC
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO20
封裝: SOIC-20
文件頁數: 17/69頁
文件大?。?/td> 394K
代理商: MC68HC05J5DW
GENERAL RELEASE SPECIFICATION
December 11, 1996
MOTOROLA
CENTRAL PROCESSING UNIT
MC68HC05J5
3-2
REV 1.1
3.1.1 Accumulator (A)
The accumulator is a general purpose 8-bit register as shown in Figure 3-1. The
CPU uses the accumulator to hold operands and results of arithmetic calculations
or non-arithmetic operations. The accumulator is not affected by a reset of the
device.
3.1.2 Index Register (X)
The index register shown in Figure 3-1 is an 8-bit register that can perform two
functions:
Indexed addressing
Temporary storage
In indexed addressing with no offset, the index register contains the low byte of
the operand address, and the high byte is assumed to be $00. In indexed
addressing with an 8-bit offset, the CPU nds the operand address by adding the
index register content to an 8-bit immediate value. In indexed addressing with a
16-bit offset, the CPU nds the operand address by adding the index register con-
tent to a 16-bit immediate value.
The index register can also serve as an auxiliary accumulator for temporary stor-
age. The index register is not affected by a reset of the device.
3.1.3 Stack Pointer (SP)
The stack pointer shown in Figure 3-1 is a 16-bit register. In MCU devices with
memory space less than 64K-bytes the unimplemented upper address lines are
ignored. The stack pointer contains the address of the next free location on the
stack. During a reset or the reset stack pointer (RSP) instruction, the stack pointer
is set to $00FF. The stack pointer is then decremented as data is pushed onto the
stack and incremented as data is pulled off the stack.
When accessing memory, the ten most signicant bits are permanently set to
0000000011. The six least signicant register bits are appended to these ten xed
bits to produce an address within the range of $00FF to $00C0. Subroutines and
interrupts may use up to 64 ($40) locations. If 64 locations are exceeded, the
stack pointer wraps around and overwrites the previously stored information. A
subroutine call occupies two locations on the stack and an interrupt uses ve loca-
tions.
3.1.4 Program Counter (PC)
The program counter shown in Figure 3-1 is a 16-bit register. In MCU devices
with memory space less than 64K-bytes the unimplemented upper address lines
are ignored. The program counter contains the address of the next instruction or
operand to be fetched.
相關PDF資料
PDF描述
MC68HC05J5CJDW 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO16
MC68HC05JB4DW 8-BIT, MROM, 3 MHz, MICROCONTROLLER, PDSO28
MC68HC05JJ6DW 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP20
MC68HC05JJ6P 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP20
MC68HC05JJ6CP 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP20
相關代理商/技術參數
參數描述
MC68HC05JJ6 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification Microcontrollers
MC68HC05JJ6CDW 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification Microcontrollers
MC68HC05JJ6CDWE 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification Microcontrollers
MC68HC05JJ6CP 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification Microcontrollers
MC68HC05JJ6CPE 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification Microcontrollers