參數資料
型號： MB90V595GCR
元件分類： 微控制器/微處理器
英文描述： 16-BIT, 16 MHz, MICROCONTROLLER, CPGA256
封裝： CERAMIC, PGA-256
文件頁數： 5/47頁
文件大?。?/td> 674K
代理商： MB90V595GCR
MB90595/595G Series
13
(5) Pull-up/down resistors
The MB90595 Series does not support internal pull-up/down resistors. Use external components where needed.
(6) Crystal Oscillator Circuit
Noises around X0 or X1 pins may cause abnormal operations. Make sure to provide bypass capacitors via
shortest distance from X0, X1 pins, crystal oscillator (or ceramic resonator) and ground lines, and make sure
that lines of oscillation circuit not cross the lines of other circuits.
A printed circuit board artwork surrounding the X0 and X1 pins with ground area for stabilizing the operation is
highly recommended.
(7) Turning-on Sequence of Power Supply to A/D Converter and Analog Inputs
Make sure to turn on the A/D converter power supply (AVCC, AVRH, AVRL) and analog inputs (AN0 to AN7) after
turning-on the digital power supply (VCC).
Turn-off the digital power after turning off the A/D converter supply and analog inputs. In this case, make sure
that the voltage does not exceed AVRH or AVCC (turning on/off the analog and digital power supplies simulta-
neously is acceptable).
(8) Connection of Unused Pins of A/D Converter
Connect unused pins of A/D converter to AVCC = VCC, AVSS = AVRH = DVCC = VSS.
(9) N.C. Pin
The N.C. (internally connected) pin must be opened for use.
(10) Notes on Energization
To prevent the internal regulator circuit from malfunctioning, set the voltage rise time during energization at 50
s or more (0.2 V to 2.7 V).
(11) Indeterminate outputs from ports 0 and 1
During oscillation setting time of step-down circuit (during a power-on reset) after the power is turned on, the
outputs from ports 0 and 1 become following state.
If RST pin is “H”, the outputs become indeterminate.
If RST pin is “L”, the outputs become high-impedance.
Pay attention to the port output timing shown as follow.
Oscillation setting time2
Power-on reset1
Vcc (Power-supply pin)
PONR (power-on reset) signal
RST (external asynchronous reset) signal
RST (internal reset) signal
Oscillation clock signal
KA (internal operation clock A) signal
KB (internal operation clock B) signal
PORT (port output) signal
Period of indeterminated
*1:Power-on reset time: Period of “clock frequency
× 217” (Clock frequency of 16 MHz: 8.19 ms)
*2:Oscillation setting time: Period of “clock frequency
× 218” (Clock frequency of 16 MHz: 16.38ms)
RST pin is “H”
相關PDF資料
PDF描述
MB90V595CR 16-BIT, 16 MHz, MICROCONTROLLER, CPGA256
MB91151APMC-G RISC MICROCONTROLLER, PQFP144
MB91233LPFF-G-XXX 32-BIT, MROM, 33.6 MHz, RISC MICROCONTROLLER, PQFP120
MB91340PMT 32-BIT, MROM, 66 MHz, RISC MICROCONTROLLER, PQFP176
MB91605PMC 32-BIT, MROM, 80 MHz, RISC MICROCONTROLLER, PQFP176
相關代理商/技術參數
參數描述
MB-910 制造商:Circuit Test 功能描述:BREADBOARD WIRING KIT - 350 PCS
MB9100100 制造商:COM/DUO 功能描述:FAN 4-6WKS
MB9100-100 制造商:COM/DUO 功能描述:FAN 4-6WKS
MB91101 制造商:Panasonic Industrial Company 功能描述:IC
MB91101A 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:32-bit RISC Microcontroller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*