
MB90895 Series
28
DS07-13731-5E
2.
Recommended Operating Conditions
(VSS
= AVSS = 0.0 V)
*1 : Use a ceramic capacitor, or a capacitor of similar frequency characteristics. On the Vcc pin, use a bypass
capacitor that has a larger capacity than that of Cs.
Refer to the following figure for connection of smoothing capacitor Cs.
*2: Users considering application exceeding TA = +105
°C are advised to contact their FUJITSU MICROELECTRON-
ICS representatives beforehand for reliability limitations.
*3 : Use the PB circuit board which has 4 or more layers.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of
the semiconductor device. All of the device's electrical characteristics are warranted when the
device is operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges.
Operation outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented
on the data sheet. Users considering application outside the listed conditions are advised to contact
their representatives beforehand.
Parameter
Symbol
Value
Unit
Remarks
Min
Typ
Max
Power supply voltage
VCC
3.5
5.0
5.5
V
Under normal operation
3.0
5.5
V
Retain status of stop
operation
4.0
5.5
V
Accuracy guarantee voltage
of A/D converter
Smoothing capacitor
CS
0.1
1.0
μF*1
Operating temperature
TA
40
+105
°C Other than MB90F897Y/YS
40
+125
°C
*2
Other than MB90F897Y/YS
40
+150
°C
*2, *3
MB90F897Y/YS
C
CS
C pin connection diagram