參數資料
型號： MB90F598PF
廠商： FUJITSU LTD
元件分類： 微控制器/微處理器
英文描述： 16-bit Proprietary Microcontroller
中文描述： 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP100
封裝： PLASTIC, QFP-100
文件頁數： 13/52頁
文件大小： 295K
代理商： MB90F598PF
MB90595/595G Series
13
(5) Pull-up/down resistors
The MB90595 Series does not support internal pull-up/down resistors. Use external components where needed.
(6) Crystal Oscillator Circuit
Noises around X0 or X1 pins may cause abnormal operations. Make sure to provide bypass capacitors via
shortest distance from X0, X1 pins, crystal oscillator (or ceramic resonator) and ground lines, and make sure
that lines of oscillation circuit not cross the lines of other circuits.
A printed circuit board artwork surrounding the X0 and X1 pins with ground area for stabilizing the operation is
highly recommended.
(7) Turning-on Sequence of Power Supply to A/D Converter and Analog Inputs
Make sure to turn on the A/D converter power supply (AV
CC
, AVRH, AVRL) and analog inputs (AN0 to AN7) after
turning-on the digital power supply (V
CC
).
Turn-off the digital power after turning off the A/D converter supply and analog inputs. In this case, make sure
that the voltage does not exceed AVRH or AV
CC
(turning on/off the analog and digital power supplies simulta-
neously is acceptable).
(8) Connection of Unused Pins of A/D Converter
Connect unused pins of A/D converter to AV
CC
= V
CC
, AV
SS
= AVRH = DV
CC
= V
SS
.
(9) N.C. Pin
The N.C. (internally connected) pin must be opened for use.
(10) Notes on Energization
To prevent the internal regulator circuit from malfunctioning, set the voltage rise time during energization at 50
μ
s or more (0.2 V to 2.7 V).
(11) Indeterminate outputs from ports 0 and 1 (MB90598/F598/V595/V595G only)
During oscillation setting time of step-down circuit (during a power-on reset) after the power is turned on, the
outputs from ports 0 and 1 become following state.
If RST pin is “H”, the outputs become indeterminate.
If RST pin is “L”, the outputs become high-impedance.
Pay attention to the port output timing shown as follow.
Oscillation setting time
2
Power-on reset
1
Vcc (Power-supply pin)
PONR (power-on reset) signal
RST (external asynchronous reset) signal
RST (internal reset) signal
Oscillation clock signal
KA (internal operation clock A) signal
KB (internal operation clock B) signal
PORT (port output) signal
Period of indeterminated
*1:Power-on reset time: Period of “clock frequency
×
2
17
” (Clock frequency of 16 MHz: 8.19 ms)
*2:Oscillation setting time: Period of “clock frequency
×
2
18
” (Clock frequency of 16 MHz: 16.38ms)
RST pin is “H”
相關PDF資料
PDF描述
MB90611APF 16-bit Proprietary Microcontroller
MB90611APFV 16-bit Proprietary Microcontroller
MB90611A 16-Bit Proprietary Microcontroller(16位專用微控制器)
MB90613A 16-Bit Proprietary Microcontroller(16位專用微控制器)
MB90622A 16-Bit Proprietary Microcontroller(16位專用微控制器)
相關代理商/技術參數
參數描述
MB90F598PFR-GE1 制造商:FUJITSU 功能描述:
MB90F804-201PFR-GE1 制造商:FUJITSU 功能描述:
MB90F867APFR-G-SNE1 制造商:FUJITSU 功能描述:
MB90F867ASPF-GE1 制造商:FUJITSU 功能描述:IC 16BIT MCU I2C SMD QFP100
MB90F867ASPFR-GE1 制造商:FUJITSU 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*