參數(shù)資料
型號: MB90F463APMC
廠商: FUJITSU LTD
元件分類: 微控制器/微處理器
英文描述: 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP64
封裝: 12 X 12 MM, 1.70 MM HEIGHT, 0.65 MM PITCH, PLASTIC, LFQFP-64
文件頁數(shù): 61/88頁
文件大?。?/td> 2202K
代理商: MB90F463APMC
MB90460/465 Series
64
DS07-13714-2E
(Continued)
Note that when the microcontroller drive current is low, such as in the power saving modes, the +B input
potential may pass through the protective diode and increase the potential at the VCC pin, and this may affect
other devices.
Note that if a +B signal is input when the microcontroller current is off (not fixed at 0 V) , the power supply is
provided from the pins, so that incomplete operation may result.
Note that if the +B input is applied during power-on, the power supply is provided from the pins and the resulting
supply voltage may not be sufficient to operate the power-on reset.
Care must be taken not to leave the +B input pin open.
Note that analog system input/output pins other than the A/D input pins (LCD drive pins, comparator input
pins, etc.) cannot accept
+B signal input.
Sample recommended circuits:
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
P-ch
N-ch
VCC
R
Input/Output Equivalent circuits
+B input (0 V to 16 V)
Limiting
resistance
Protective diode
相關PDF資料
PDF描述
MB90F462PMC 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP64
MB90487BPF 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP100
MB90483CPF 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP100
MB90483CPFV 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP100
MB90F489BPFV 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數(shù)
參數(shù)描述
MB90F474HPF-GE1 制造商:FUJITSU 功能描述:IC 16BIT MCU I2C SMD QFP100
MB90F474HPFR-GE1 制造商:FUJITSU 功能描述:
MB90F474HPMC-GE1 制造商:FUJITSU 功能描述:
MB90F474LPFR-GE1 制造商:FUJITSU 功能描述:
MB90F474LPMCR-GE1 制造商:FUJITSU 功能描述: