MB90340 Series
3
(Continued)
Timer
Time-base timer, clock timer, watchdog timer : 1 channel
8/16-bit PPG timer : 8-bit X 16 channels, or 16-bit X 8 channels
16-bit reload timer : 4 channels
16- bit input/output timer
- 16-bit free run timer : 2 channel (FRT0 : ICU 0/1/2/3, OCU 0/1/2/3, FRT1 : ICU 4/5/6/7, OCU 4/5/6/7)
- 16- bit input capture: (ICU) : 8 channels
- 16-bit output compare : (OCU) : 8 channels
Full-CAN interface : up to 2 channels
Compliant with Ver2.0A and Ver2.0B CAN specifications
Flexible message buffering (mailbox and FIFO buffering can be mixed)
CAN wake-up function
UART (LIN/SCI) : up to 4 channels
Equipped with full-duplex double buffer
Clock-asynchronous or clock-synchronous serial transmission is available
I2C interface* : up to 2 channels (devices with C-suffix only)
Up to 400 Kbits/s transfer rate
DTP/External interrupt : up to 16 channels, CAN wakeup : up to 2 channels
Module for activation of expanded intelligent I/O service (EI2OS), DMA, and generation of external interrupt.
Delay interrupt generator module
Generates interrupt request for task switching.
8/10-bit A/D converter : 16/24 channels
Resolution is selectable between 8-bit and 10-bit.
Activation by external trigger input is allowed.
Conversion time : 3
s (at 24-MHz machine clock, including sampling time)
Program patch function
Address matching detection for 6 address pointers.
Internal voltage regulator
Supports 3 V MCU core, offering low EMI and low power consumption figures
Programmable input levels
Automotive/CMOS-Schmitt (initial level is Automotive in Single chip mode)
TTL level (initial level for External bus mode)
FLASH memory security function
Protects the content of FLASH memory (FLASH memory device only)
External bus interface
Clock monitor function
* : I2C license :
Purchase of Fujitsu I2C components conveys a license under the Philips I2C Patent Rights to use, these com-
ponents in an I2C system provided that the system conforms to the I2C Standard Specification as defined by
Philips.