- 您現在的位置：買賣IC網 > PDF目錄377895 > MB88111PFQ (FUJITSU LTD) A/D Converter (With 24-Channel Input at 10-bit Resolution) PDF資料下載
參數資料
| 型號： | MB88111PFQ |
| 廠商： | FUJITSU LTD |
| 元件分類： | ADC |
| 英文描述： | A/D Converter (With 24-Channel Input at 10-bit Resolution) |
| 中文描述： | 24-CH 10-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PQFP44 |
| 封裝： | PLASTIC, QFP-44 |
| 文件頁數： | 11/26頁 |
| 文件大小： | 169K |
| 代理商： | MB88111PFQ |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁當前第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁
11
MB88111
4. ATC (Auto Trigger Conversion) Command
The ATC command is the same as the STC command in basic operation. This command can initiates A/D
conversion using the external trigger pin ATGX. The external trigger signal is sampled by 1
μ
s clock and filtered
by 1 clock. The external trigger signal input during A/D conversion is ignored. If the next command is the STOP
command, A/D conversion is terminated. If it is the NOP command, the ATC command is executed continuously.
The channel cannot be changed at this time. To change the channel, input the ATC command to that effect.
Example of ATC command execution (1)
NOP command input during A/D conversion enables the same channel to be A/D converted.
An attempt to set the ATGX signal low during A/D conversion is ignored.
NOP command input during A/D conversion does not affect operation. Output data at this time is 0000H.
Example of ATC command execution (2)
Setting the ATGX signal low again after A/D conversion restarts A/D conversion.
In data output mode B, however, do not use the ATC command in this way, or data will not be output correctly.
If A/D conversion is completed during NOP command input, the ENDC and IRQX pin levels become “H” and
“L” respectively upon completion of the NOP command input.
SCK
SIN
SOT
ENDC
IRQX
A/D
ATGX
16 Cycle
AN5
NOP
AN6
NOP
STOP
0000H
Data 5
Data 5
0000H
Data 6
AN5 conversion
AN5 conversion
AN6 conversion
SCK
SIN
SOT
ENDC
IRQX
A/D
ATGX
16 Cycle
AN7
0000H
AN8
Data 7
NOP
STOP
0000H
Data 8
AN7 conversion
AN7 conversion
AN8 conversion
coAN7
相關PDF資料 |
PDF描述 |
|---|---|
| MB88111 | Analog-to-Digital Converter(二十四通道串行接口A/D轉換器) |
| MB88141A | D/A Converter for Digital Tuning (Compatible with I2C Bus) |
| MB88141AP | ER 35C 35#16 PIN RECP WALL |
| MB88141APF | D/A Converter for Digital Tuning (Compatible with I2C Bus) |
| MB88141APFV | D/A Converter for Digital Tuning (Compatible with I2C Bus) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MB88111P-SH | 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:A/D Converter (With 24-Channel Input at 10-bit Resolution) |
| MB88121BPFV-ESE2 | 制造商:FUJITSU 功能描述: |
| MB88121BPFV-GSE1 | 制造商:FUJITSU 功能描述: |
| MB88121C | 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:The Ultimate Automotive Network |
| MB88121CPMC1-ESE2 | 制造商:FUJITSU 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。