- 您現在的位置：買賣IC網 > PDF目錄377878 > MB15E07SLPV1 (FUJITSU LTD) Single Serial Input PLL Frequency Synthesizer On-Chip 2.5 GHz Prescaler PDF資料下載
參數資料
| 型號： | MB15E07SLPV1 |
| 廠商： | FUJITSU LTD |
| 元件分類： | XO, clock |
| 英文描述： | Single Serial Input PLL Frequency Synthesizer On-Chip 2.5 GHz Prescaler |
| 中文描述： | PLL FREQUENCY SYNTHESIZER, 2500 MHz, PBCC16 |
| 封裝： | PLASTIC, BCC-16 |
| 文件頁數： | 3/22頁 |
| 文件大?。?/td> | 233K |
| 代理商： | MB15E07SLPV1 |
3
MB15E07
I
PIN DESCRIPTIONS
Pin no.
Pin name
I/O
Descriptions
1
OSC
IN
I
Programmable reference divider input.
Oscillator input.
Connection for an crystal or a TCXO.
TCXO should be connected with a coupling capacitor.
2
OSC
OUT
O
Oscillator output.
Connection for an external crystal.
3
V
P
–
Power supply voltage input for the charge pump.
4
V
CC
–
Power supply voltage input.
5
D
O
O
Charge pump output.
Phase of the charge pump can be reversed by FC bit.
6
GND
–
Ground.
7
Xfin
I
Prescaler complementary input, and should be grounded via a capacitor.
8
fin
I
Prescaler input.
Connection with an external VCO should be done with AC coupling.
9
Clock
I
Clock input for the 19-bit shift register.
Data is shifted into the shift register on the rising edge of the clock.
is prohibited.)
(Open
10
Data
I
Serial data input using binary code.
The last bit of the data is a control bit.
Control bit = “H” ;Data is transmitted to the programmable reference
counter.
Control bit = “L” ;Data is transmitted to the programmable counter.
(Open is prohibited.)
11
LE
I
Load enable signal input
When LE is high, the data in the shift register is transferred to a latch,
according to the control bit in the serial data.
(Open is prohibited.)
12
PS
I
Power saving mode control. This pin must be set at “L” at Power-ON.
(Open is prohibited.)
PS = “H” ; Normal mode
PS = “L” ; Power saving mode
13
ZC
I
Forced high-impedance control for the charge pump (with internal pull up
resistor.)
ZC = “H” ; Normal Do output.
ZC = “L” ; Do becomes high impedance.
14
LD/fout
O
Lock detect signal output(LD)/phase comparator monitoring
output (fout).
The output signal is selected by LDS bit in the serial data.
LDS = “H” ; outputs fout (fr/fp monitoring output)
LDS = “L” ; outputs LD (“H” at locking, “L” at unlocking.)
15
φ
P
O
Phase comparator output for an external charge pump. Nch open drain
output.
16
φ
R
O
Phase comparator output for an external charge pump. CMOS output.
相關PDF資料 |
PDF描述 |
|---|---|
| MB15E07SL | Single Serial Input PLL Frequency Synthesizer On-chip 2.5 GHz Prescaler(單串行輸入PLL頻率合成器，片內2.5 GHz預定標器) |
| MB15E07SR | Single Serial Input PLL Frequency Synthesizer On-chip 2.5 GHz Prescaler |
| MB15E07SRPFT | Single Serial Input PLL Frequency Synthesizer On-chip 2.5 GHz Prescaler |
| MB15E07SRPV1 | Single Serial Input PLL Frequency Synthesizer On-chip 2.5 GHz Prescaler |
| MB15E07 | Serial Input PLL Frequency Synthesizer(串行輸入PLL頻率合成器) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MB15E07SLPV1-G-6E1 | 功能描述:IC SYNTHESIZER PLL 2.5GHZ 16BCC RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 時鐘發生器，PLL，頻率合成器 系列:- 產品變化通告:Product Discontinuation 04/May/2011 標準包裝:96 系列:- 類型:時鐘倍頻器，零延遲緩沖器 PLL:帶旁路 輸入:LVTTL 輸出:LVTTL 電路數:1 比率 - 輸入:輸出:1:8 差分 - 輸入:輸出:無/無 頻率 - 最大:133.3MHz 除法器/乘法器:是/無 電源電壓:3 V ~ 3.6 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:管件 其它名稱:23S08-5HPGG |
| MB15E07SR | 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Single Serial Input PLL Frequency Synthesizer On-chip 2.5 GHz Prescaler |
| MB15E07SRPFT | 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:Single Serial Input PLL Frequency Synthesizer On-chip 2.5 GHz Prescaler |
| MB15E07SRPFT-G-BND | 制造商:FUJITSU 功能描述: |
| MB15E07SRPFT-G-BNDE1 | 制造商:FUJITSU 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。