- 您現在的位置：買賣IC網 > PDF目錄10574 > MAX1089ETA+T (Maxim Integrated Products)IC ADC 10BIT 150KSPS 8-TDFN PDF資料下載
參數資料
| 型號： | MAX1089ETA+T |
| 廠商： | Maxim Integrated Products |
| 文件頁數： | 2/15頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC ADC 10BIT 150KSPS 8-TDFN |
| 產品培訓模塊： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 標準包裝： | 1 |
| 位數： | 10 |
| 采樣率（每秒）： | 150k |
| 數據接口： | MICROWIRE?，QSPI?，串行，SPI? |
| 轉換器數目： | 1 |
| 功率耗散（最大）： | 740µW |
| 電壓電源： | 單電源 |
| 工作溫度： | -40°C ~ 80°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 8-WDFN 裸露焊盤 |
| 供應商設備封裝： | 8-TDFN-EP（3x3） |
| 包裝： | 標準包裝 |
| 輸入數目和類型： | 1 個差分，單極；1 個差分，雙極 |
| 產品目錄頁面： | 1395 (CN2011-ZH PDF) |
| 其它名稱： | MAX1089ETA+TDKR |
MAX1086–MAX1089
150ksps, 10-Bit, 2-Channel Single-Ended, and
1-Channel True-Differential ADCs in SOT23 and TDFN
10
______________________________________________________________________________________
Output Data Format
Figures 5a and 5b illustrate the conversion timing for
the MAX1086–MAX1089. The 10-bit conversion result is
output in MSB first format, followed by two sub-bits (S1
and S0). Data on DOUT transitions on the falling edge
of SCLK. All 12-bits must be clocked out before CNVST
transitions again. For the MAX1088/MAX1089, data is
straight binary for unipolar mode and two’s comple-
ment for bipolar mode. For the MAX1086/MAX1087,
data is always straight binary.
Applications Information
Automatic Shutdown Mode
With CNVST low, the MAX1086–MAX1089 defaults to an
AutoShutdown state (<0.2A) after power-up and
between conversions. After detecting a rising edge on
CNVST, the part powers up, sets DOUT low and enters
track mode. After detecting a falling-edge on CNVST, the
device enters hold mode and begins the conversion. A
maximum of 3.7s later, the device completes conver-
sion, enters shutdown and MSB is available at DOUT.
External Reference
An external reference is required for the MAX1086–
MAX1089. Use a 0.1F bypass capacitor for best per-
formance. The reference input structure allows a volt-
age range of +1V to VDD + 50mV.
Transfer Function
Figure 6 shows the unipolar transfer function for the
MAX1086–MAX1089. Figure 7 shows the bipolar transfer
function for the MAX1088/MAX1089. Code transitions
occur halfway between successive-integer LSB values.
Connection to Standard Interfaces
The MAX1086–MAX1089 feature a serial interface that is
fully compatible with SPI, QSPI, and MICROWIRE. If a
serial interface is available, establish the CPU’s serial
interface as a master, so that the CPU generates the seri-
al clock for the ADCs. Select a clock frequency up to
8MHz.
How to Perform a Conversion
1)
Use a general purpose I/O line on the CPU to hold
CNVST low between conversions.
2)
Drive CNVST high to acquire AIN1(MAX1086/
MAX1087) or unipolar mode (MAX1088/MAX1089).
To acquire AIN2(MAX1086/MAX1087) or bipolar
mode (MAX1088/MAX1089), drive CNVST low and
high again.
3)
Hold CNVST high for 1.4s.
4)
Drive CNVST low and wait approximately 3.7s for
conversion to complete. After 3.7s, the MSB is
available at DOUT.
5)
Activate SCLK for a minimum of 12 rising clock
edges. DOUT transitions on SCLK’s falling edge
OUTPUT CODE
FULL-SCALE
TRANSITION
11 . . . 111
11 . . . 110
11 . . . 101
00 . . . 011
00 . . . 010
00 . . . 001
00 . . . 000
12
3
0
FS
FS - 3/2LSB
FS = VREF
ZS = GND
INPUT VOLTAGE (LSB)
1LSB =
VREF
1024
MAX1086–
MAX1089
Figure 6. Unipolar Transfer Function
011 . . . 111
011 . . . 110
000 . . . 010
000 . . . 001
000 . . . 000
111 . . . 111
111 . . . 110
111 . . . 101
100 . . . 001
100 . . . 000
- FS
0
INPUT VOLTAGE (LSB)
OUTPUT CODE
ZS = 0
+FS - 1LSB
*VCOM
VREF / 2 *VIN = (AIN+) - (AIN-)
FS =
VREF
2
-FS =
-VREF
2
1LSB =
VREF
1024
≤
MAX1088/MAX1089
Figure 7. Bipolar Transfer Function
相關PDF資料 |
PDF描述 |
|---|---|
| VI-2TP-IW-F1 | CONVERTER MOD DC/DC 13.8V 100W |
| VI-2T2-IW-F4 | CONVERTER MOD DC/DC 15V 100W |
| VE-BTJ-MX-F2 | CONVERTER MOD DC/DC 36V 75W |
| VI-2T2-IW-F3 | CONVERTER MOD DC/DC 15V 100W |
| MAX11609EEE+ | IC ADC SERIAL 10BIT 8CH 16-QSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MAX108CHC | 制造商:Maxim Integrated Products 功能描述:192 PIN SBGA PACKAGING - Bulk |
| MAX108CHC-D | 制造商:Maxim Integrated Products 功能描述:ADC SGL FLASH 1.5GSPS 8BIT PARALLEL 192PIN ESBGA - Bulk |
| MAX108CHC-TD | 制造商:Maxim Integrated Products 功能描述:ADC SGL FLASH 1.5GSPS 8BIT PARALLEL 192PIN ESBGA - Tape and Reel |
| MAX108EVKIT | 制造商:Maxim Integrated Products 功能描述:+-5V, 1.5GSPS, 8-BIT ADC WITH ON-CHIP 2.2 GHZ - Bulk |
| MAX109 | 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:8-Bit, 2.2Gsps ADC with Track/Hold Amplifier and 1:4 Demultiplexed LVDS Outputs |
發(fā)布緊急采購，3分鐘左右您將得到回復。