參數資料
型號: MAX1058BETM+
廠商: Maxim Integrated Products
文件頁數: 30/44頁
文件大小: 0K
描述: IC ADC/DAC 10BIT 48-TQFN-EP
產品培訓模塊: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝: 43
類型: ADC,DAC
分辨率(位): 10 b
采樣率(每秒): 225k
數據接口: MICROWIRE?,QSPI?,串行,SPI?
電壓電源: 模擬和數字
電源電壓: 4.75 V ~ 5.25 V
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 48-WFQFN 裸露焊盤
供應商設備封裝: 48-TQFN-EP(7x7)
包裝: 管件
MAX1020/MAX1022/MAX1057/MAX1058
10-Bit, Multichannel ADCs/DACs with FIFO,
Temperature Sensing, and GPIO Ports
36
______________________________________________________________________________________
(UP TO 514 INTERNALLY CLOCKED ACQUISITIONS AND CONVERSIONS)
MSB1
X = DON'T CARE.
tDOV
LSB1
MSB2
(CONVERSION BYTE)
CS
DOUT
SCLK
DIN
EOC
Figure 8. Clock Mode 10—The command byte to the conversion register begins the acquisition (
CNVST is not required).
version. However, coupled noise may result in degrad-
ed ADC SNR.
If averaging is turned on, multiple
CNVST pulses need to
be performed before a result is written to the FIFO. Once
the proper number of conversions has been performed
to generate an averaged FIFO result (as specified to the
averaging register), the scan logic automatically switch-
es the analog-input multiplexer to the next requested
channel. If a temperature measurement is programmed,
it is performed after the first rising edge of
CNVST follow-
ing the command byte written to the conversion register.
The temperature-conversion result is available on DOUT
once
EOC has been pulled low. Temperature results are
available in 12-bit format.
Internally Timed Acquisitions and
Conversions Using the Serial Interface
ADC Conversions in Clock Mode 10
In clock mode 10, the wake-up, acquisition, conversion,
and shutdown sequence is initiated by writing a com-
mand byte to the conversion register, and is performed
automatically using the internal oscillator. This is the
default clock mode upon power-up. See Figure 8 for
clock mode 10 timing.
Initiate a scan by writing a command byte to the con-
version register. The MAX1020/MAX1022/MAX1057/
MAX1058 then power up, scan all requested channels,
store the results in the FIFO, and shut down. After the
scan is complete,
EOC is pulled low and the results are
available in the FIFO. If a temperature measurement is
requested, the temperature result precedes all other
FIFO results. Temperature results are available in 12-bit
format.
EOC stays low until CS is pulled low again. Wait
until all conversions are complete before reading the
FIFO. SPI communications to the DAC and GPIO regis-
ters are permitted during conversion. However, cou-
pled noise may result in degraded ADC SNR.
相關PDF資料
PDF描述
V110A28M300BF CONVERTER MOD DC/DC 28V 300W
M83723/78R10026 CONN PLUG 2POS STRAIGHT W/PINS
MAX1022BETX+ IC ADC/DAC 10BIT W/FIFO 36-TQFN
D38999/20WE26SD CONN RCPT 26POS WALL MNT W/SCKT
MAX1020BETX+ IC ADC/DAC 10BIT 36-TQFN-EP
相關代理商/技術參數
參數描述
MAX1058BETM+ 功能描述:ADC / DAC多通道 10Bit AD/DACs w/FIFO Temp Sns & GPIO Port RoHS:否 制造商:Texas Instruments 轉換速率: 分辨率:8 bit 接口類型:SPI 電壓參考: 電源電壓-最大:3.6 V 電源電壓-最小:2 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-40
MAX1058BETM+T 功能描述:ADC / DAC多通道 10Bit AD/DACs w/FIFO Temp Sns & GPIO Port RoHS:否 制造商:Texas Instruments 轉換速率: 分辨率:8 bit 接口類型:SPI 電壓參考: 電源電壓-最大:3.6 V 電源電壓-最小:2 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-40
MAX1058BETM-T 功能描述:ADC / DAC多通道 RoHS:否 制造商:Texas Instruments 轉換速率: 分辨率:8 bit 接口類型:SPI 電壓參考: 電源電壓-最大:3.6 V 電源電壓-最小:2 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-40
MAX1058EVKIT 功能描述:數據轉換 IC 開發工具 Programmers, Development Systems RoHS:否 制造商:Texas Instruments 產品:Demonstration Kits 類型:ADC 工具用于評估:ADS130E08 接口類型:SPI 工作電源電壓:- 6 V to + 6 V
MAX105ECS 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:Dual, 6-Bit, 800Msps ADC with On-Chip, Wideband Input Amplifier