參數資料
型號： M38869FFAGP
廠商： Mitsubishi Electric Corporation
英文描述： SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
中文描述： 單芯片8位CMOS微機
文件頁數： 81/110頁
文件大?。?/td> 1601K
代理商： M38869FFAGP
81
3886 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
(3) Flash memory mode 3 (CPU reprogramming
mode)
The M38869FFAHP/GP has the CPU reprogramming mode where
a built-in flash memory is handled by the central processing unit
(CPU).
In CPU reprogramming mode, the flash memory is handled by
writing and reading to/from the flash memory control register (see
Figure 79) and the flash command register (see Figure 80).
The CNV
SS
pin is used as the V
PP
power supply pin in CPU repro-
gramming mode. It is necessary to apply the power-supply voltage
of V
PP
H from the external to this pin.
Functional Outline (CPU reprogramming mode)
Figure 79 shows the flash memory control register bit configura-
tion. Figure 80 shows the flash command register bit
configuration.
Bit 0 of the flash memory control register is the CPU reprogram-
ming mode select bit. When this bit is set to “1” and V
PP
H is
applied to the CNVss/V
PP
pin, the CPU reprogramming mode is
selected. Whether the CPU reprogramming mode is realized or
not is judged by reading the CPU reprogramming mode monitor
flag (bit 2 of the flash memory control register).
Bit 1 is a busy flag which becomes “1” during erase and program
execution.
Whether these operations have been completed or not is judged
by checking this flag after each command of erase and the pro-
gram is executed.
Bits 4, 5 of the flash memory control register are the erase/pro-
gram area select bits. These bits specify an area where erase and
program is operated. When the erase command is executed after
an area is specified by these bits, only the specified area is
erased. Only for the specified area, programming is enabled; for
the other areas, programming is disabled.
When CPU reprogramming mode is valid, the area where is not
specified by the erase/program area select bits cannot be read
out.
Transfer CPU reprogramming mode control program to internal
RAM before entering the CPU reprogramming mode, and then ex-
ecute this program on internal RAM.
If an interrupt occurs while this program is being executed, the
flash memory area is accessed, but normally operation cannot be
performed because the flash memory area cannot be read out.
During CPU reprogramming mode control program execution, ex-
ecute the processing such as interrupt disabled, etc.
Figure 81 shows the CPU mode register bit configuration in the
CPU reprogramming mode. Set bits 1 and 0 to “00” (single-chip
mode) in the CPU reprogramming mode.
Fig. 79 Flash memory control register bit configuration
7
6
5
4
3
2
1
0
0
0
Flash memory control regsiter
(FCON : address 0FFE
16
)
CPU reprogramming mode select bit
(Note)
0 : CPU reprogramming mode is invalid. (Normal operation mode)
1 : When applying 0 V or V
PP
L to CNV
SS
/V
PP
pin, CPU reprogramming mode is
invalid. When applying V
PP
H to CNV
SS
/V
PP
pin, CPU reprogramming mode is valid.
Erase/Program busy flag
0 : Erase and program are completed or not have been executed.
1 : Erase/program is being executed.
CPU reprogramming mode monitor flag
0 : CPU reprogramming mode is invalid.
1 : CPU reprogramming mode is valid.
Erase/Program area select bits
0 0 : Addresses 1000
16
to FFFF
16
(total 60 Kbytes)
0 1 : Addresses 1000
16
to 7FFF
16
(total 28 Kbytes)
1 0 : Addresses 8000
16
to FFFF
16
(total 32 Kbytes)
1 1 : Not available
Fix this bit to “0.”
Fix this bit to “0.”
Note:
Bit 0 can be reprogrammed only when 0 V is applied to the CNV
SS
/V
PP
pin.
Not used (returns "0" when read)
相關PDF資料
PDF描述
M38867M8A SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38867M8A-010HP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38867M8A-011HP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38869MCA-XXXGP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38869MCA-XXXHP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
相關代理商/技術參數
參數描述
M38869FFAGP#U0 功能描述:IC 740/3886 MCU FLASH 80QFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:740/38000 產品培訓模塊:CAN Basics Part-1 CAN Basics Part-2 Electromagnetic Noise Reduction Techniques Part 1 M16C Product Overview Part 1 M16C Product Overview Part 2 標準包裝:1 系列:M16C™ M32C/80/87 核心處理器:M32C/80 芯體尺寸:16/32-位 速度:32MHz 連通性:EBI/EMI，I²C，IEBus，IrDA，SIO，UART/USART 外圍設備:DMA，POR，PWM，WDT 輸入/輸出數:121 程序存儲器容量:384KB（384K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:24K x 8 電壓 - 電源 (Vcc/Vdd):3 V ~ 5.5 V 數據轉換器:A/D 34x10b，D/A 2x8b 振蕩器型:內部 工作溫度:-20°C ~ 85°C 封裝/外殼:144-LQFP 包裝:托盤 產品目錄頁面:749 (CN2011-ZH PDF) 配用:R0K330879S001BE-ND - KIT DEV RSK M32C/87
M38869FFAHP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38869FFAHP#UU 功能描述:IC 740/3886 MCU FLASH 80LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:740/38000 產品培訓模塊:CAN Basics Part-1 CAN Basics Part-2 Electromagnetic Noise Reduction Techniques Part 1 M16C Product Overview Part 1 M16C Product Overview Part 2 標準包裝:1 系列:M16C™ M32C/80/87 核心處理器:M32C/80 芯體尺寸:16/32-位 速度:32MHz 連通性:EBI/EMI，I²C，IEBus，IrDA，SIO，UART/USART 外圍設備:DMA，POR，PWM，WDT 輸入/輸出數:121 程序存儲器容量:384KB（384K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:24K x 8 電壓 - 電源 (Vcc/Vdd):3 V ~ 5.5 V 數據轉換器:A/D 34x10b，D/A 2x8b 振蕩器型:內部 工作溫度:-20°C ~ 85°C 封裝/外殼:144-LQFP 包裝:托盤 產品目錄頁面:749 (CN2011-ZH PDF) 配用:R0K330879S001BE-ND - KIT DEV RSK M32C/87
M38869FF-XXXHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38869M1-XXXHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*