<button id="hhlaq"><pre id="hhlaq"></pre></button>
  • <samp id="hhlaq"><kbd id="hhlaq"><strong id="hhlaq"></strong></kbd></samp>
    <tt id="hhlaq"><input id="hhlaq"></input></tt>
    <button id="hhlaq"><tbody id="hhlaq"><legend id="hhlaq"></legend></tbody></button>
    參數資料
    型號: M3826AMFA-XXXGP
    元件分類: 微控制器/微處理器
    英文描述: 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP100
    封裝: PLASTIC, LQFP-100
    文件頁數: 54/93頁
    文件大?。?/td> 996K
    代理商: M3826AMFA-XXXGP
    Rev.2.00
    May. 24, 2006
    page 58 of 90
    REJ03B0028-0200
    3826 Group (A version)
    NOTES ON USE
    Countermeasures Against Noise
    (1) Shortest wiring length
    Wiring for RESET pin
    Make the length of wiring which is connected to the RESET pin
    as short as possible. Especially, connect a capacitor across the
    RESET pin and the VSS pin with the shortest possible wiring
    (within 20 mm).
    ● Reason
    The width of a pulse input into the RESET pin is determined by
    the timing necessary conditions. If noise having a shorter pulse
    width than the standard is input to the RESET pin, the reset is
    released before the internal state of the microcomputer is com-
    pletely initialized. This may cause a program runaway.
    Fig. 64 Wiring for clock I/O pins
    (2) Connection of bypass capacitor across VSS line and VCC line
    In order to stabilize the system operation and avoid the latch-up,
    connect an approximately 0.1
    F bypass capacitor across the VSS
    line and the VCC line as follows:
    Connect a bypass capacitor across the VSS pin and the VCC pin
    at equal length.
    Connect a bypass capacitor across the VSS pin and the VCC pin
    with the shortest possible wiring.
    Use lines with a larger diameter than other signal lines for VSS
    line and VCC line.
    Connect the power source wiring via a bypass capacitor to the
    VSS pin and the VCC pin.
    Fig. 63 Wiring for the RESET pin
    Wiring for clock input/output pins
    Make the length of wiring which is connected to clock I/O pins
    as short as possible.
    Make the length of wiring (within 20 mm) across the grounding
    lead of a capacitor which is connected to an oscillator and the
    VSS pin of a microcomputer as short as possible.
    Separate the VSS pattern only for oscillation from other VSS
    patterns.
    ● Reason
    If noise enters clock I/O pins, clock waveforms may be de-
    formed. This may cause a program failure or program runaway.
    Also, if a potential difference is caused by the noise between
    the VSS level of a microcomputer and the VSS level of an oscil-
    lator, the correct clock will not be input in the microcomputer.
    Fig. 65 Bypass capacitor across the VSS line and the VCC line
    RESET
    Reset
    circuit
    Noise
    VSS
    Reset
    circuit
    VSS
    RESET
    VSS
    N.G.
    O.K.
    Noise
    XIN
    XOUT
    VSS
    XIN
    XOUT
    VSS
    N.G.
    O.K.
    VSS
    VCC
    VSS
    VCC
    N.G.
    O.K.
    相關PDF資料
    PDF描述
    M3826AMFA-XXXGP 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP100
    M38268MCA-XXXGP 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP100
    M3826AMFA-XXXFP 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP100
    M3826AMFLXXXGP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP100
    M38268MCLXXXFP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP100
    相關代理商/技術參數
    參數描述
    M3826-BK001 制造商:Alpha Wire 功能描述:
    M3826-BK002 制造商:Alpha Wire 功能描述:
    M3826-BK005 制造商:Alpha Wire 功能描述:
    M3826-BK199 制造商:Alpha Wire 功能描述:
    M3826-BLACK-100 制造商:Alpha Wire 功能描述: