參數資料
型號： M38006M2-XXXSP
廠商： Mitsubishi Electric Corporation
元件分類： DC/DC變換器
英文描述： 1 watt dc-dc converters
中文描述： 1瓦的DC - DC轉換器
文件頁數： 123/173頁
文件大小： 4203K
代理商： M38006M2-XXXSP
3800 GROUP USER’S MANUAL
3-21
APPENDIX
3.3 Notes on use
3.3.5 Notes on memory expansion mode and microprocessor mode
(1) Writing data to the port latch of port P3
In the memory expansion or the microprocessor mode, ports P3
0
and P3
1
can be used as the output port. Use the
LDM
or
STA
instruction for writing data to the port latch (address 0006
16
) of port P3.
When using a read-modify-write instruction (the
SEB
or the
CLB
instruction), allocate the read and the write
enabled memory at address 0006
16
.
Reason
In the memory expansion or microprocessor mode, address 0006
16
is allocated in the external area.
Accordingly,
Data is read from the external memory.
Data is written to both the port latch of the port P3 and the external memory.
Accordingly, when executing a read-modify-write instruction for address 0006
16
, external memory data is read and
modified, and the result is written in both the port latch of the port P3 and the external memory. If the read enabled
memory is not allocated at address 0006
16
, the read data is undefined. The undefined data is modified and written
to the port latch of the port P3. The port latch data of port P3 becomes “undefined.”
(2) Overlap of an internal memory and an external memory
When the internal and the external memory are overlapped in the memory expansion mode, the internal memory
is valid in this overlapped area. When the CPU writes or reads to this area, the following is performed :
When reading data
Only the data in the internal memory is read into the CPU and the data in the external memory is not read into
the CPU. However, as the read signal and address are still valid, the external memory data of the
corresponding address is output to the external data bus.
When writing data
Data is written in both the internal and the external memory.
相關PDF資料
PDF描述
M38006M2-XXXSS 1 watt dc-dc converters
M38007E4DSP 1 watt dc-dc converters
M38007M1-XXXFP 1 watt dc-dc converters
M38007M1-XXXFS Single Output LDO, 800mA, Fixed and Adj., Internal Current limit, Thermal Overload Protection 3-DDPAK/TO-263 0 to 125
M38007M1-XXXSP Single Output LDO, 800mA, Fixed and Adj., Internal Current limit, Thermal Overload Protection 4-SOT-223 -40 to 125
相關代理商/技術參數
參數描述
M38007RSS 制造商:Renesas Electronics Corporation 功能描述:EMULATION MCU/8BIT CMOS EMULATION CHIP - Bulk
M38007T-ADS 功能描述:DEV TEMPORARY TARGET BOARD FOR M RoHS:否 類別:編程器，開發系統 >> 配件 系列:- 標準包裝:1 系列:- 附件類型:適配器板 適用于相關產品:RCB230，RCB231，RCB212 配用:26790D-ND - RCB BREAKOUT BOARD RS232 CABLE
M38007T-PRB 功能描述:EV 64-PIN RSS/MCU TO .5, .65 & . RoHS:否 類別:編程器，開發系統 >> 配件 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 標準包裝:1 系列:- 附件類型:USB 至 1-Wire? RJ11 適配器 適用于相關產品:1-Wire? 設備 產品目錄頁面:1429 (CN2011-ZH PDF)
M3801 BK001 制造商:Alpha Wire 功能描述:CBL 3COND 18AWG BLK 1000'
M3801 BK002 制造商:Alpha Wire 功能描述:CBL 3COND 18AWG BLK 500'
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*