參數資料
型號： M37906M4C-XXXFP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PDSO42
封裝： 0.450 INCH, 0.80 MM PITCH, PLASTIC, SSOP-42
文件頁數： 52/101頁
文件大小： 766K
代理商： M37906M4C-XXXFP
54
M37906M4C-XXXFP, M37906M4C-XXXSP, M37906M4H-XXXFP
M37906M4H-XXXSP, M37906M6C-XXXFP, M37906M6C-XXXSP
M37906M8C-XXXFP, M37906M8C-XXXSP
PRELIMINAR
Y
Notice:
This
is not
a final
specification.
Som
e param
etric
lim
its are
subject
to change.
16-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
Transmission
clock
TEj
1/fi
× (n + 1) × 2
1/fi
× (n + 1) × 2
TIj
CTSj
Write in transmit buffer register
D0 D1 D2 D3 D4 D5 D6 D7
D1 D2 D3 D4 D5 D6 D7
D0 D1 D2 D3 D4 D5 D6 D7
D0
Transmit register
←Transmit buffer register
Stopped because TEj = “0”
CLKj
TENDj
TXDj
TXEPTYj
Fig. 60 Clock synchronous serial I/O timing
Interrupt request at completion of reception
When the RIk flag changes from “0” to “1”, in other words, when the
receive operation is completed, the interrupt request bit of the
UARTk receive interrupt control register can be set to “1”.
The timing when this interrupt request bit is to be set to “1” can be
selected from the following:
Each reception
When an error occurs at reception
If bit 5 of the UARTk transmit/receive control register 0 (UART re-
ceive interrupt mode select bit) is cleared to “0”, the interrupt request
bit is set to “1” at each reception. If bit 5 is set to “1”, the interrupt re-
quest bit is set to “1” only when an error occurs. (In the clock syn-
chronous serial communication, only when an overrun error occurs,
the interrupt request bit is set to “1”.)
Polarity of transfer clock
In the clock synchronous serial communication, by bit 6 of the UARTj
transmit/receive control register 0 (CPL), the polarity of a transfer
clock can be selected.
As shown in Figure 61, when bit 6 = “0”, the polarity is as follows:
In transmission, transmit data is output at the falling edge of CLKj.
In reception, receive data is input at the rising edge of CLKk.
When not in transfer, CLKi is at “H” level.
When bit 6 = “1”, the polarity is as follows:
In transmission, transmit data is output at the rising edge of CLKj.
In reception, receive data is input at the rising edge of CLKk.
When not in transfer, CLKi is at “L” level.
相關PDF資料
PDF描述
M37906M4C-XXXSP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PDIP42
M37906M4H-XXXSP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PDIP42
M37920F8MHP 16-BIT, FLASH, 26 MHz, MICROCONTROLLER, PQFP100
M37920S4CGP 16-BIT, 20 MHz, MICROCONTROLLER, PQFP100
M37920S4CGP 16-BIT, 20 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
M37906M4C-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
M37906M4H-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
M37906M6C-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
M37906M6C-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
M37906M8C-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*