參數資料
型號： M37630E4FP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, OTPROM, 10 MHz, MICROCONTROLLER, PQFP44
封裝： 0.80 MM PITCH, PLASTIC, QFP-44
文件頁數： 6/48頁
文件大?。?/td> 563K
代理商： M37630E4FP
MITSUBISHI
ELECTRIC
14
MITSUBISHI MICROCOMPUTERS
7630 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
INTERRUPTS
There are 24 interrupts: 6 external, 17 internal, and 1 software.
Interrupt Control
Each interrupt except the BRK instruction interrupt has both an
interrupt request bit and an interrupt enable bit, and is controlled by
the interrupt disable flag. An interrupt occurs when the correspond-
ing interrupt request and enable bits are “1” and the interrupt dis-
able flag is “0”. Interrupt enable bits can be cleared or set by
software. Interrupt request bits can be cleared by software but can-
not be set by software. The BRK instruction interrupt and reset can-
not be disabled with any flag or bit. The I flag disables all interrupts
except the BRK instruction interrupt and reset. If several interrupt
requests occur at the same time, the interrupt with the highest prior-
ity is accepted first.
Interrupt Operation
Upon acceptance of an interrupt, the following operations are auto-
matically performed.
1.
The processing being executed is stopped.
2.
The contents of the program counter and processor status
register are automatically pushed onto the stack.
3.
Concurrently with the push operation, the interrupt jump
destination address is read from the vector table into the
program counter.
4.
The interrupt disable flag is set and the corresponding interrupt
request bit is cleared.
Notes on use
When the active edge of an external interrupt (INT0, INT1, CNTR0,
CNTR1, CWKU or KOI) is changed, the corresponding interrupt
request bit may also be set. Therefore, take the following sequence.
(1) Disable the external interrupt which is selected.
(2) Change the active edge in interrupt edge selection register.
(in the case of CNTR0: Timer X mode register; in the case of
CNTR1: Timer Y mode register)
(3) Clear the interrupt request bit to “0”.
(4) Enable the external interrupt which is selected.
相關PDF資料
PDF描述
M37640E8FP 8-BIT, OTPROM, 24 MHz, MICROCONTROLLER, PQFP80
M37640E8FS 8-BIT, OTPROM, 24 MHz, MICROCONTROLLER, PQFP80
M37640M8-XXXFP 8-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP80
M37640E8FP 8-BIT, OTPROM, 24 MHz, MICROCONTROLLER, PQFP80
M37643M8-XXXHP 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
相關代理商/技術參數
參數描述
M37630E4FP#U3 功能描述:IC 7630 MCU OTP 44QFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:740/7600 產品培訓模塊:CAN Basics Part-1 CAN Basics Part-2 Electromagnetic Noise Reduction Techniques Part 1 M16C Product Overview Part 1 M16C Product Overview Part 2 標準包裝:1 系列:M16C™ M32C/80/87 核心處理器:M32C/80 芯體尺寸:16/32-位 速度:32MHz 連通性:EBI/EMI，I²C，IEBus，IrDA，SIO，UART/USART 外圍設備:DMA，POR，PWM，WDT 輸入/輸出數:121 程序存儲器容量:384KB（384K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:24K x 8 電壓 - 電源 (Vcc/Vdd):3 V ~ 5.5 V 數據轉換器:A/D 34x10b，D/A 2x8b 振蕩器型:內部 工作溫度:-20°C ~ 85°C 封裝/外殼:144-LQFP 包裝:托盤 產品目錄頁面:749 (CN2011-ZH PDF) 配用:R0K330879S001BE-ND - KIT DEV RSK M32C/87
M37630E4FS 功能描述:EPROM MCU/8BIT CMOS EMULATION CH RoHS:否 類別:編程器，開發系統 >> 配件 系列:- 標準包裝:1 系列:- 附件類型:適配器板 適用于相關產品:RCB230，RCB231，RCB212 配用:26790D-ND - RCB BREAKOUT BOARD RS232 CABLE
M37630E4T-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37630E4T-XXXFS 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37630M4T 制造商:CMLMICRO 制造商全稱:CML Microcircuits 功能描述:Baseband Processor for ‘Leisure’ Radios with Data
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*