參數資料
型號: M37546G4-XXXHP
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQCC36
封裝: 6 X 6 MM, 0.50 MM PITCH, PLASTIC, WQFN-36
文件頁數: 48/103頁
文件大小: 1156K
代理商: M37546G4-XXXHP
REJ03B0160-0122 Rev.1.22 Mar 13, 2009
page 49 of 100
7546 Group
Fig. 60 Block diagram of clock synchronous serial I/O2
Fig. 61 Operation of clock synchronous serial I/O2 function
●Serial I/O2
Serial I/O2 can be used as either clock synchronous or asynchro-
nous (UART) serial I/O. A dedicated timer is also provided for
baud rate generation.
(1) Clock Synchronous Serial I/O2 Mode
Clock synchronous serial I/O2 mode can be selected by setting
the serial I/O2 mode selection bit of the serial I/O2 control register
(bit 6) to “1”.
For clock synchronous serial I/O2, the transmitter and the receiver
must use the same clock. If an internal clock is used, transfer is
started by a write signal to the TB/RB.
D7
D0
D1
D2
D3
D4
D5
D6
D0
D1
D2
D3
D4
D5
D6
RBF = 1
TSC = 1
TBE = 0
TBE = 1
TSC = 0
Transfer shift clock
(1/2 to 1/2048 of the internal
clock, or an external clock)
Serial output TxD2
Serial input RxD2
Write pulse to receive/transmit
buffer register 2 (address 002E16)
Overrun error (OE)
detection
Notes 1: As the transmit interrupt (TI), which can be selected, either when the transmit buffer has emptied (TBE=1) or after
the transmit shift operation has ended (TSC=1), by setting the transmit interrupt source selection bit (TIC) of the
serial I/O2 control register.
2: If data is written to the transmit buffer register when TSC=0, the transmit clock is generated continuously and serial
data is output continuously from the TxD2 pin.
3: The receive interrupt (RI) is set when the receive buffer full flag (RBF) becomes “1” .
Receive enable signal SRDY2
1/4
F/F
P06/SCLK2
Serial I/O2 status register
Serial I/O2 control register
P07/SRDY2
P04/RXD2
P05/TXD2
XIN
Receive buffer register 2
Address 002E16
Receive shift register 2
Receive buffer full flag (RBF)
Receive interrupt request (RI)
Clock control circuit
Shift clock
Serial I/O2 synchronous
clock selection bit
Frequency division ratio 1/(n+1)
Baud rate generator 2
Address 003216
BRG count source selection bit
Clock control circuit
Falling-edge detector
Transmit buffer register 2
Data bus
Address 002E16
Shift clock
Transmit shift completion flag (TSC)
Transmit buffer empty flag (TBE)
Transmit interrupt request (TI)
Transmit interrupt source selection bit
Address 002F16
Data bus
Address 003016
Transmit shift register 2
相關PDF資料
PDF描述
M37546G2GP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP32
M37546G2HP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQCC36
M37546G4-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP32
M37546G4-XXXGP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP32
M37547G2-XXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDSO36
相關代理商/技術參數
參數描述
M37546G4-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37547G2FP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37547G2FP#U0 功能描述:MCU 2/5V 8KB 36-SSOP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 標準包裝:250 系列:80C 核心處理器:8051 芯體尺寸:8-位 速度:16MHz 連通性:EBI/EMI,I²C,UART/USART 外圍設備:POR,PWM,WDT 輸入/輸出數:40 程序存儲器容量:- 程序存儲器類型:ROMless EEPROM 大小:- RAM 容量:256 x 8 電壓 - 電源 (Vcc/Vdd):4.5 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:68-LCC(J 形引線) 包裝:帶卷 (TR)
M37547G2-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37547G4FP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER