參數資料
型號: M37546G4-XXXHP
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQCC36
封裝: 6 X 6 MM, 0.50 MM PITCH, PLASTIC, WQFN-36
文件頁數: 12/103頁
文件大小: 1156K
代理商: M37546G4-XXXHP
REJ03B0160-0122 Rev.1.22 Mar 13, 2009
page 16 of 100
7546 Group
I/O Ports
[Direction registers] PiD
The I/O ports have direction registers which determine the input/
output direction of each pin. Each bit in a direction register corre-
sponds to one pin, and each pin can be set to be input or output.
When “1” is set to the bit corresponding to a pin, this pin becomes
an output port. When “0” is set to the bit, the pin becomes an in-
put port.
When data is read from a pin set to output, not the value of the pin
itself but the value of port latch is read. Pins set to input are float-
ing, and permit reading pin values.
If a pin set to input is written to, only the port latch is written to and
the pin remains floating.
Set bits 6 and 7 of port P2 direction register to “1”.
Set bits 5 and 6 of port P3 direction register to “1”.
[Port P0P3 drive capacity control register] DCCR
By setting the Port P0P3 drive capacity control register (address
001516), the drive capacity of the N-channel output transistor for
the port P0 and port P3 can be selected.
[Pull-up control register] PULL
By setting the pull-up control register (address 001616), ports P0
and P3 can exert pull-up control by program. However, pins set to
output are disconnected from this control and cannot exert pull-up
control.
[Port P1P3 control register] P1P3C
By setting the port P1P3 control register (address 001716), a
CMOS input level or a TTL input level can be selected for ports
P10, P12, P13, and P37 by program.
Fig. 16 Structure of port P1P3 control register
Fig. 15 Structure of pull-up control register
Port P1P3 control register
(P1P3C: address 001716, initial value: 0016)
b7
b0
Not used
1 : TTL level
0 : CMOS level
P10,P12,P13 input level selection bit
Set “0” to this bit certainly.
1 : TTL level
0 : CMOS level
P37/INT0 input level selection bit
Pull-up control register
(PULL: address 001616, initial value: 0016)
P00 pull-up control bit
P01, P02 pull-up control bit
P03–P07 pull-up control bit
P30 pull-up control bit
P31, P32 pull-up control bit
P33 pull-up control bit
P34 pull-up control bit
P37 pull-up control bit
b7
b0
0 : Pull-up Off
1 : Pull-up On
Note : Pins set to output ports are disconnected from pull-up control.
Port P0P3 drive capacity control register
(DCCR: address 001516, initial value: 0016)
Port P00 drive capacity bit
Ports P01, P02 drive capacity bit
Ports P03–P07 drive capacity bit
Port P30 drive capacity bit
Ports P31, P32 drive capacity bit
Port P33 drive capacity bit
Ports P34 drive capacity bit
Ports P37 drive capacity bit
b7
b0
0 : Low
1 : High
Note: Number of LED drive port (drive capacity is HIGH) is 8-port.
Fig. 14 Structure of port P0P3 drive capacity control register
相關PDF資料
PDF描述
M37546G2GP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP32
M37546G2HP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQCC36
M37546G4-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP32
M37546G4-XXXGP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP32
M37547G2-XXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDSO36
相關代理商/技術參數
參數描述
M37546G4-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37547G2FP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37547G2FP#U0 功能描述:MCU 2/5V 8KB 36-SSOP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 標準包裝:250 系列:80C 核心處理器:8051 芯體尺寸:8-位 速度:16MHz 連通性:EBI/EMI,I²C,UART/USART 外圍設備:POR,PWM,WDT 輸入/輸出數:40 程序存儲器容量:- 程序存儲器類型:ROMless EEPROM 大小:- RAM 容量:256 x 8 電壓 - 電源 (Vcc/Vdd):4.5 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:68-LCC(J 形引線) 包裝:帶卷 (TR)
M37547G2-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37547G4FP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER