參數資料
型號： M37534E4GP
廠商： Renesas Technology Corp.
英文描述： SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
中文描述： 單芯片8位CMOS微機
文件頁數： 19/55頁
文件大?。?/td> 610K
代理商： M37534E4GP
7534 Group
Rev.2.00 Jun 21, 2004 page 19 of 54
REJ03B0099-0200Z
Timers
The 7534 Group has 3 timers: timer X, timer 1 and timer 2.
The division ratio of every timer and prescaler is 1/(n+1) provided
that the value of the timer latch or prescaler is n.
All the timers are down count timers. When a timer reaches “0”, an
underflow occurs at the next count pulse, and the corresponding timer
latch is reloaded into the timer. When a timer underflows, the inter-
rupt request bit corresponding to each timer is set to “1”.
G
Timer 1, Timer 2
Prescaler 12 always counts f(X
IN
)/16. Timer 1 and timer 2 always
count the prescaler output and periodically sets the interrupt request
bit.
G
Timer X
Timer X can be selected in one of 4 operating modes by setting the
timer X mode register.
Timer Mode
The timer counts the signal selected by the timer X count source
selection bit.
Pulse Output Mode
The timer counts the signal selected by the timer X count source
selection bit, and outputs a signal whose polarity is inverted each
time the timer value reaches “0”, from the CNTR
0
pin.
When the CNTR
0
active edge switch bit is “0”, the output of the
CNTR
0
pin is started with an “H” output.
At “1”, this output is started with an “L” output. When using a timer in
this mode, set the port P1
4
direction register to output mode.
Event Counter Mode
The operation in the event counter mode is the same as that in the
timer mode except that the timer counts the input signal from the
CNTR
0
pin.
When the CNTR
0
active edge switch bit is “0”, the timer counts
the rising edge of the CNTR
0
pin. When this bit is “1”, the timer
counts the falling edge of the CNTR
0
pin.
Pulse Width Measurement Mode
When the CNTR
0
active edge switch bit is “0”, the timer counts the
signal selected by the timer X count source selection bit while the
CNTR
0
pin is “H”. When this bit is “1”, the timer counts the signal
while the CNTR
0
pin is “L”.
In any mode, the timer count can be stopped by setting the timer X
count stop bit to “1”. Each time the timer overflows, the interrupt
request bit is set.
Fig. 19 Structure of timer X mode register
Fig. 20 Timer count source set register
Timer X mode register
(TM : Address 002B
16
)
Timer X operating mode bits
b1 b0
0 0 : Timer mode
0 1 : Pulse output mode
1 0 : Event counter mode
1 1 : Pulse width measurement mode
CNTR
0
active edge switch bit
0 : Interrupt at falling edge
Count at rising edge
(in event counter mode)
1 : Interrupt at rising edge
Count at falling edge
(in event counter mode)
Timer X count stop bit
0 : Count start
1 : Count stop
Not used (return “0” when read)
b7 b0
Timer count source set register
(TCSS : Address 002E
16
)
Timer X count source selection bit (Note)
0 : f(X
IN
)/16
1 : f(X
IN
)/2
b7 b0
Not used (return “0” when read)
Note :
To switch the timer X count source selection bit ,
stop the timer X count operation.
相關PDF資料
PDF描述
M37534E4FP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37544 SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37548G1FP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37549G1FP 32K x 8 Static RAM; Density: 256 Kb; Organization: 32Kb x 8; Vcc (V): 4.5 to 5.5 V;
M38030F2L-XXXWG SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
相關代理商/技術參數
參數描述
M37534E4GP#U1 功能描述:MCU 4/5V 8K PB-FREE 32-LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:740/38000 產品培訓模塊:CAN Basics Part-1 CAN Basics Part-2 Electromagnetic Noise Reduction Techniques Part 1 M16C Product Overview Part 1 M16C Product Overview Part 2 標準包裝:1 系列:M16C™ M32C/80/87 核心處理器:M32C/80 芯體尺寸:16/32-位 速度:32MHz 連通性:EBI/EMI，I²C，IEBus，IrDA，SIO，UART/USART 外圍設備:DMA，POR，PWM，WDT 輸入/輸出數:121 程序存儲器容量:384KB（384K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:24K x 8 電壓 - 電源 (Vcc/Vdd):3 V ~ 5.5 V 數據轉換器:A/D 34x10b，D/A 2x8b 振蕩器型:內部 工作溫度:-20°C ~ 85°C 封裝/外殼:144-LQFP 包裝:托盤 產品目錄頁面:749 (CN2011-ZH PDF) 配用:R0K330879S001BE-ND - KIT DEV RSK M32C/87
M37534E8FP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37534E8SP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37534M4 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37534M4-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*