參數資料
型號： M37480E8SP
廠商： Mitsubishi Electric Corporation
英文描述： SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
中文描述： 單芯片8位CMOS微機
文件頁數： 40/97頁
文件大?。?/td> 1076K
代理商： M37480E8SP
MITSUBISHI MICROCOMPUTERS
7480/7481 GROUP
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
40
PRELIMINARY
Notice: This is not a final specification.
Some parametric limits are subject to change.
STP/WIT Instruction Control
The STP instruction and the WIT instruction can be enabled or
disabled selectively by using the STP instruction operation control
register. To cope with a program runaway after reset, the STP in-
struction and the WIT instruction are disabled in the initial status.
The STP and WIT instructions can be set as enable/disable only
by writing to the STP instruction operation control register twice
successively so as not to stop the oscillation clock even if a write
data error is caused by program runaway. Figure 41 shows a
structure of the STP instruction operation control register.
Fig. 41 Structure of STP instruction operation control register
Explanation of STP Instruction Operation
Control Register
The STP instruction operation control register will be enabled by
writing data to the same address twice successively. If data is not
written in continuous form, the written data is not valid but the pre-
vious value is held.
If an interrupt is received while the same data is written twice,
there is a possibility that the write instruction in the interrupt rou-
tine may be executed. For this reason, rewriting is required after
interrupt disable. Figure 42 shows a reference example of data re-
writing.
Fig. 42 Reference example of data rewriting
b7
b0
STP instruction operation control register
(STPCON: address 00DE
16
)
STP instruction and WIT instruction enable/disable selection bit (Note)
0 : STP/WIT instruction enabled
1 : STP/WIT instruction disabled
Not used (“0” at read)
The STP instruction and the WIT instruction are disabled in the initial status. When using these
instructions, set bit 0 of the STP instruction operation control register to “1”, then set this bit to “0”.
(Writing twice successively)
When not using the STP and WIT instructions, set this bit to “1” either once or twice.
Note :
G
STP/WIT instruction enable
SEI
LDM #01H, 0DEH
LDM #00H, 0DEH
CLI
Use only in interrupt enable status
Interrupt
disable in
this period
G
STP/WIT instruction disable
SEI
LDM #01H, 0DEH
LDM #01H, 0DEH
CLI
Use only in interrupt enable status
Interrupt
disable in
this period
相關PDF資料
PDF描述
M37481E8SP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37481E8SS SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37481E8T SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37481MXT SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37510E5156FP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
相關代理商/技術參數
參數描述
M37480E8T 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37480E8T-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 7470 SERIES
M37480E8T-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 7470 SERIES
M37480E8-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 7470 SERIES
M37480E8-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 7470 SERIES
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*