參數資料
型號： M37212EF-XXXFP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP80
封裝： 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80
文件頁數： 30/67頁
文件大小： 4380K
代理商： M37212EF-XXXFP
MITSUBISHI MICROCOMPUTERS
M37212M4-XXXSP, M37212M6-XXXSP/FP
M37212EF-XXXSP/FP, M37212EFSP/FP
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER
and ON-SCREEN DISPLAY CONTROLLER
36
The horizontal position is common to all blocks, and can be set in 64
steps (where 1 step is 4TC, TC being the display oscillation period)
as values “0016” to “3F16” in bits 0 to 5 of the horizontal position
register (address 00E016). The structure of the horizontal position
register is shown in Figure 37.
The display position in the vertical direction is determined by count-
ing the horizontal sync signal (HSYNC). At this time, it starts to count
the rising edge (falling edge) of HSYNC signal from after about 1 ma-
chine cycle of rising edge (falling edge) of VSYNC signal. So interval
from rising edge (falling edge) of VSYNC signal to rising edge (falling
edge) of HSYNC signal needs enough time (2 machine cycles or more)
for avoiding jitter. The polarity of HSYNC and VSYNC signals can se-
lect with the CRT port control register (address 00EC16). For details.
refer to (8) CRT Output Pin Control.
Note: When bits 0 and 1 of the CRT port control register (address
00EC16) are set to “1” (negative polarity), the vertical position
is determined by counting falling edge of HSYNC signal after
rising edge of VSYNC control signal in the microcomputer (re-
fer to Figure 35).
Fig. 36. Structure of vertical position register
Fig. 37. Structure of horizontal position register
Vertical position registers 1, 2
(CV1 : address 00E116)
(CV2 : address 00E216)
70
Vertical display start positions
128 steps from “0016” to “7F16”
Horizontal position register
(HR : address 00E016)
Horizontal display start positions
64 steps from “0016” to “3F16”
(1 step is 4TC)
70
Fig. 35. Supplement explanation for display position
When bits 0 and 1 of the CRT port control register (address
00EC16) are set to “1” (negative polarity)
VSYNC signal input
VSYNC control
signal in
microcomputer
0.25 to 0.50 [
s]
(at f(XIN) = 8MHz)
Period of counting
HSYNC signal
(Note)
HSYNC
signal input
Not count
12345
Note: Do not generate falling edge of HSYNC signal near rising
edge of VSYNC control signal in microcomputer to avoid
jitter.
相關PDF資料
PDF描述
M37212EF-XXXSP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDIP52
M37221M6-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP42
M37224M3-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42
M37270MF-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP64
M37273MFH-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP52
相關代理商/技術參數
參數描述
M37212M4 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER with ON-SCREEN DISPLAY CONTROLLER
M37212M4-054SP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER with ON-SCREEN DISPLAY CONTROLLER
M37212M4-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER with ON-SCREEN DISPLAY CONTROLLER
M37212M6-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER with ON-SCREEN DISPLAY CONTROLLER
M37212M6-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER for VOLTAGE SYNTHESIZER with ON-SCREEN DISPLAY CONTROLLER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*