- 您現在的位置：買賣IC網 > PDF目錄358968 > LZ2323H5 (Sharp Corporation) PLUG, D, FILTERED, 330PF, 62WAY; Connector type:D Sub, High-Density; Gender:Plug; Ways, No. of:62; Termination method:Solder; Material, contact:Copper Alloy; Plating, contact:Bright Tin; Series:FHTB; Material:Steel; Current RoHS Compliant: Yes PDF資料下載
參數資料
| 型號： | LZ2323H5 |
| 廠商： | Sharp Corporation |
| 英文描述： | PLUG, D, FILTERED, 330PF, 62WAY; Connector type:D Sub, High-Density; Gender:Plug; Ways, No. of:62; Termination method:Solder; Material, contact:Copper Alloy; Plating, contact:Bright Tin; Series:FHTB; Material:Steel; Current RoHS Compliant: Yes |
| 中文描述： | 1/3-type傳感器與防治荒漠化面積320萬像素 |
| 文件頁數： | 12/12頁 |
| 文件大小： | 95K |
| 代理商： | LZ2323H5 |
3) To avoid generating static electricity,
a. do not scrub the glass surface with cloth or
plastic.
b. do not attach any tape or labels.
c. do not clean the glass surface with dust-
cleaning tape.
4) When storing or transporting the device, put it in
a container of conductive material.
3. Dust and Contamination
Dust or contamination on the glass surface could
deteriorate the output characteristics or cause a
scar. In order to minimize dust or contamination on
the glass surface, take the following precautions :
1) Handle the CCD in a clean environment such
as a cleaned booth. (The cleanliness level
should be, if possible, class 1 000 at least.)
2) Do not touch the glass surface with the fingers.
If dust or contamination gets on the glass
surface, the following cleaning method is
recommended :
Dust from static electricity should be blown
off with an ionized air blower. For anti-
electrostatic measures, however, ground all
the leads on the device before blowing off
the dust.
The contamination on the glass surface
should be wiped off with a clean applicator
soaked in Isopropyl alcohol. Wipe slowly and
gently in one direction only.
– Frequently replace the applicator and do not
use the same applicator to clean more than
one device.
Note : In most cases, dust and contamination
are unavoidable, even before the device
is first used. It is, therefore, recommended
that the above procedures should be
taken to wipe out dust and contamination
before using the device.
4. Other
1) Soldering should be manually performed within
5 seconds at 350 °C maximum at soldering iron.
2) Avoid using or storing the CCD at high tem-
perature or high humidity as it is a precise
optical component. Do not give a mechanical
shock to the CCD.
3) Do not expose the device to strong light. For
the color device, long exposure to strong light
will fade the color of the color filters.
12
PRECAUTIONS FOR CCD AREA SENSORS
相關PDF資料 |
PDF描述 |
|---|---|
| LZ2325A | Dual-power-supply (5 V/12 V) Operation 1/3-type CCD Area Sensors with 320 k Pixels |
| LZ2336 | Two-power supply (+5 V and +12 V) operation 1 / 3 type B/W CCD Area Sensor for EIA |
| LZ2346 | Twopower supply (+5 V and +12 V) operation CCIR 1/3 type B/W CCD Area Sensor for CCIR |
| LZ2354BJ | 1/3-type CCD Area Sensors with 410 k Pixels |
| LZ2363B | 1/3-type CCD Area Sensors with 470 k Pixels |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LZ23242J | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Area CCD Image Array |
| LZ2324AK | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Area CCD Image Array |
| LZ2324HJ | 制造商:SHARP 制造商全稱:Sharp Electrionic Components 功能描述:1/3-type CCD Area Sensors with 320 k Pixels |
| LZ2324J | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Area CCD Image Array |
| LZ2325A | 制造商:SHARP 制造商全稱:Sharp Electrionic Components 功能描述:Dual-power-supply (5 V/12 V) Operation 1/3-type CCD Area Sensors with 320 k Pixels |
發布緊急采購，3分鐘左右您將得到回復。