Ordering number : EN5651B
90298RM (OT) No. 5651-1/20
Overview
The LV2700V provides the reception and transmission
functions necessary for half-duplex communication in
spread-spectrum communications systems.
Features
Can be used in weak radio wave band without frequency
conversion (direct signal processing at 236 MHz)
Can also be used in the ISM band (900MHz, 2.4GHz)
with frequency conversion
Wide spread-spectrum bandwidth (20 MHz)
Sanyo developed system for PN code synchronization
Allows direct primary modulation (FSK and FM) by
data and analog signals.
Data transfer at a maximum rate of 256kbps can be
made (when the built-in LPF is used)
Low-voltage operation (2.7 to 5.5 V)
Low power dissipation (36 mW in RX mode)
Small package: SSOP30
Functions
[TX Block]
Spectrum spreader
Crystal oscillator circuit
PN code generator (M sequence)
M sequence code length
(511, 255, 127, 63, 31, or 15 chips)
9.83 MHz PLL
Band limiting filter (LPF) for data transmission
[RX Block]
Spectrum despreader
Synchronization supplementation and protection
236 MHz PLL
PN code generator (M sequence)
M sequence code length
(511, 255, 127, 63, 31, or 15 chips)
FM demodulation
Lock detector
150k LPF through SW
Package Dimensions
unit: mm
4182-SSOP30
SANYO: SSOP30
[LV2700V]
LV2700V
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Spread Spectrum Communications IC
Bi-CMOS IC
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.