- 您現在的位置：買賣IC網 > PDF目錄358053 > LTL1RMTBKBINP (LITE-ON ELECTRONICS INC) T-1 SINGLE COLOR LED, BLUE, 2.95 mm PDF資料下載
參數資料
| 型號： | LTL1RMTBKBINP |
| 廠商： | LITE-ON ELECTRONICS INC |
| 元件分類： | LED |
| 英文描述： | T-1 SINGLE COLOR LED, BLUE, 2.95 mm |
| 文件頁數： | 3/8頁 |
| 文件大?。?/td> | 178K |
| 代理商： | LTL1RMTBKBINP |
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical / Optical Characteristics at T
A
=25
Parameter
Symbol
Min.
Typ.
Max.
Unit
Test Condition
Luminous Intensity
I
V
520
1500
mcd
I
F
= 20mA
Note 1,5
Viewing Angle
2
1/2
15
deg
Note 2 (Fig.6)
Peak Emission Wavelength
P
468
nm
Measurement
@Peak (Fig.1)
Dominant Wavelength
470
nm
Note 3
Spectral Line Half-Width
25
nm
Forward Voltage
V
F
3.5
4.0
V
I
F
= 20mA
Reverse Current
I
R
100
A
V
R
= 5V
NOTE: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
eye-response curve.
2.
3. The dominant wavelength,
is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device.
4. Iv classification code is marked on each packing bag.
5. The Iv guarantee should be added 15% tolerance.
6. Precautions in handling:
When soldering, leave 2mm of minimum clearance from the resin to the soldering point.
Dipping the resin to solder must be avoided.
Correcting the soldered position after soldering must be avoided.
In soldering, do not apply any stress to the lead frame particularly when heated.
When forming a lead, make sure not to apply any stress inside the resin.
Lead forming must be done before soldering.
It is necessary to cut the lead frame at normal temperature.
7. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
1/2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
Part No. : LTL1RMTBK
Page : 3 of 8
BNS-OD-C131/A4
相關PDF資料 |
PDF描述 |
|---|---|
| LTL2R3KRKBINQ | T-1 3/4 SINGLE COLOR LED, SUPER RED, 5 mm |
| LTL2U7SEKSBINW | T-1 3/4 SINGLE COLOR LED, RED, 5 mm |
| LTL2U7SYKSBINS | T-1 3/4 SINGLE COLOR LED, AMBER, 5 mm |
| LTL4HMUSJSBINLM | SINGLE COLOR LED, AMBER, 3.9 mm |
| LTL77HTBKBINL1 | T-1 SINGLE COLOR LED, BLUE, 3 mm |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTL1RMTGK | 功能描述:標準LED-通孔 Green Clear 525nm RoHS:否 制造商:Vishay Semiconductors 照明顏色:Red 光強度:0.7 mcd 波長/色溫:615 nm 顯示角:45 deg 透鏡顏色/類型:Clear, Non-Diffused 正向電流:70 mA 正向電壓:1.83 V to 3.03 V LED 大小:2 mm 系列: 封裝:Tube |
| LTL1RMTGK6 | 功能描述:標準LED-通孔 Thru-Hole Lamp 3mm Grn 525nm Clr RoHS:否 制造商:Vishay Semiconductors 照明顏色:Red 光強度:0.7 mcd 波長/色溫:615 nm 顯示角:45 deg 透鏡顏色/類型:Clear, Non-Diffused 正向電流:70 mA 正向電壓:1.83 V to 3.03 V LED 大小:2 mm 系列: 封裝:Tube |
| LTL1RMVSKNT | 制造商:Lite-On Semiconductor Corporation 功能描述:LAMP,THRU-HOLE, 3MM, INGAN, RED, 525NM, CLR - Bulk 制造商:Lite-On Semiconductor Corporation 功能描述:LAMP 3MM INGAN RED 525NM CLR |
| LTL2 | 制造商:Linrose Electronics 功能描述: |
| LTL-200uH | 制造商:P&S 功能描述:inductor |
發布緊急采購，3分鐘左右您將得到回復。