參數資料
型號: LTC3554EUD-2#TRPBF
廠商: LINEAR TECHNOLOGY CORP
元件分類: 穩壓器
英文描述: 0.6 A BATTERY CHARGE CONTROLLER, 2590 kHz SWITCHING FREQ-MAX, PQCC20
封裝: 3 X 3 MM, 0.75 MM HEIGHT, LEAD FREE, PLASTIC, QFN-20
文件頁數: 11/36頁
文件大?。?/td> 418K
代理商: LTC3554EUD-2#TRPBF
LTC3554/LTC3554-2
19
35542fb
OPERATION
Therefore, the hot trip point is set when:
R
NTC|HOT
R
NOM + RNTC|HOT
V
BUS = 0.35 VBUS
and the cold trip point is set when:
R
NTC|COLD
R
NOM + RNTC|COLD
V
BUS = 0.76 V BUS
Solving these equations for RNTC|COLD and RNTC|HOT
results in the following:
RNTC|HOT = 0.538 RNOM
and
RNTC|COLD = 3.17 RNOM
By setting RNOM equal to R25, the above equations result
in rHOT = 0.538 and rCOLD = 3.17. Referencing these ratios
to the Vishay Resistance-Temperature Curve 1 chart gives
a hot trip point of about 40°C and a cold trip point of about
0°C. The difference between the hot and cold trip points
is approximately 40°C.
By using a bias resistor, RNOM, different in value from
R25, the hot and cold trip points can be moved in either
direction. The temperature span will change somewhat due
to the nonlinear behavior of the thermistor. The following
equations can be used to easily calculate a new value for
the bias resistor:
R
NOM =
r
HOT
0.538
R25
R
NOM =
r
COLD
3.17
R25
where rHOT and rCOLD are the resistance ratios at the de-
sired hot and cold trip points. Note that these equations
are linked. Therefore, only one of the two trip points can
be independently set, the other is determined by the de-
fault ratios designed in the IC.
Consider an example where a 60°C hot trip point is desired.
From the Vishay curve 1 R-T characteristics, rHOT is 0.2488
at 60°C. Using the above equation, RNOM should be set
to 46.4k. With this value of RNOM, the cold trip point is
about 16°C. Notice that the span is now 44°C rather than
the previous 40°C. This is due to the decrease in tem-
perature gain of the thermistor as absolute temperature
increases.
The upper and lower temperature trip points can be in-
dependently programmed by using an additional bias
resistor as shown in Figure 2. The following formulas can
be used to compute the values of RNOM and R1:
R
NOM =
r
COLD –r HOT
2.714
R25
R1
= 0.536 R
NOM –r HOT R25
For example, to set the trip points to 0°C and 45°C with
a Vishay curve 1 thermistor choose:
R
NOM =
3.266 – 0.4368
2.714
100k
=104.2k
the nearest 1% value is 105k
R1 = 0.536 105k – 0.4368 100k = 12.6k
The nearest 1% value is 12.7k. The nal solution is shown
in Figure 2 and results in an upper trip point of 45°C and
a lower trip point of 0°C.
相關PDF資料
PDF描述
LTC3554EUD#PBF 0.6 A BATTERY CHARGE CONTROLLER, 2590 kHz SWITCHING FREQ-MAX, PQCC20
LTC3565EDD#PBF 2.5 A SWITCHING REGULATOR, 4000 kHz SWITCHING FREQ-MAX, PDSO10
LTC3565EDD#TRPBF 2.5 A SWITCHING REGULATOR, 4000 kHz SWITCHING FREQ-MAX, PDSO10
LTC3565EMSE#TRPBF 2.5 A SWITCHING REGULATOR, 4000 kHz SWITCHING FREQ-MAX, PDSO10
LTC3565IMSE#PBF 2.5 A SWITCHING REGULATOR, 4000 kHz SWITCHING FREQ-MAX, PDSO10
相關代理商/技術參數
參數描述
LTC3554EUD-3#PBF 制造商:Linear Technology 功能描述:IC USB POWER MANAGER 20-QFN
LTC3554EUD-3#TRPBF 制造商:Linear Technology 功能描述:IC USB POWER MANAGER 20-QFN
LTC3555 制造商:LINER 制造商全稱:Linear Technology 功能描述:High Effi ciency USB Power Manager + Triple Step-Down DC/DC
LTC3555EUFD#PBF 功能描述:IC USB POWER HE 28-QFN RoHS:是 類別:集成電路 (IC) >> PMIC - 電源管理 - 專用 系列:- 標準包裝:1 系列:- 應用:手持/移動設備 電流 - 電源:- 電源電壓:3 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:14-WFDFN 裸露焊盤 供應商設備封裝:14-LLP-EP(4x4) 包裝:Digi-Reel® 配用:LP3905SD-30EV-ND - BOARD EVALUATION LP3905SD-30 其它名稱:LP3905SD-30DKR
LTC3555EUFD#TRPBF 功能描述:IC USB POWER HE 28-QFN RoHS:是 類別:集成電路 (IC) >> PMIC - 電源管理 - 專用 系列:- 標準包裝:1 系列:- 應用:手持/移動設備 電流 - 電源:- 電源電壓:3 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:14-WFDFN 裸露焊盤 供應商設備封裝:14-LLP-EP(4x4) 包裝:Digi-Reel® 配用:LP3905SD-30EV-ND - BOARD EVALUATION LP3905SD-30 其它名稱:LP3905SD-30DKR