參數資料
型號: LTC2495IUHF#TR
廠商: LINEAR TECHNOLOGY CORP
元件分類: ADC
英文描述: 16-CH 16-BIT DELTA-SIGMA ADC, SERIAL ACCESS, PQCC38
封裝: 5 X 7 MM, PLASTIC, MO-220WKHD, QFN-38
文件頁數: 18/32頁
文件大?。?/td> 619K
代理商: LTC2495IUHF#TR
LTC2495
2495fa
every conversion cycle in order to remove the offset and
drift of the ADC. This calibration is performed through a
combination of front end switching and digital process-
ing. Since the external amplifier is placed between the
multiplexer and the ADC, it is inside this correction loop.
This results in automatic offset correction and offset drift
removal of the external amplifier.
The LTC6078 is an excellent amplifier for this function.
It operates with supply voltages as low as 2.7V and its
noise level is 18nV/√Hz. The Easy Drive input technology
of the LTC2495 enables an RC network to be added directly
to the output of the LTC6078. The capacitor reduces the
magnitude of the current spikes seen at the input to the
ADC and the resistor isolates the capacitor load from the
op-amp output enabling stable operation. The LTC6078
can also be biased at supply rails beyond those used by
the LTC2495. This allows the external sensor to swing rail-
to-rail (–0.3V to VCC + 0.3V) without the need of external
level shift circuitry.
Reference Current
Similar to the analog inputs, the LTC2495 samples the
differential reference pins (REF+ and REF) transferring
small amounts of charge to and from these pins, thus
producing a dynamic reference current. If incomplete set-
tling occurs (as a function the reference source resistance
andreferencebypasscapacitance)linearityandgainerrors
are introduced.
Forrelativelysmallvaluesofexternalreferencecapacitance
(CREF< 1nF), the voltage on the sampling capacitor settles
for reference impedances of many k
W (if CREF = 100pF up
to 10k
W will not degrade the performance (see Figures
13 and 14)
).
In cases where large bypass capacitors are required on
the reference inputs (CREF > 0.01F), full-scale and linear-
ity errors are proportional to the value of the reference
resistance. Every ohm of reference resistance produces
a full-scale error of approximately 0.5ppm
(while operat-
ing in simultaneous 50Hz/60Hz mode (see Figures 15
and 16)
). If the input common mode voltage is equal to
the reference common mode voltage, a linearity error of
approximately 0.67ppm per 100
W of reference resistance
results (see Figure 17). In applications where the input
and reference common mode voltages are different, the
errorsincrease.A1Vdifferenceinbetweencommonmode
input and common mode reference results in a 6.7ppm
INL error for every 100
W of reference resistance.
In addition to the reference sampling charge, the reference
ESDprotectiondiodeshaveatemperaturedependentleak-
age current. This leakage current, nominally 1nA (±10nA
max) results in a small gain error. A 100
W reference
resistance will create a 0.5V full-scale error.
Figure 13. +FS Error vs RSOURCE at VREF (Small CREF)
Figure 14. –FS Error vs RSOURCE at VREF (Small CREF)
applicaTions inFormaTion
RSOURCE ()
0
+FS
ERROR
(ppm)
50
70
90
10k
2495 F13
30
10
40
60
80
20
0
–10
10
100
1k
100k
VCC = 5V
VREF = 5V
VIN+ = 3.75V
VIN– = 1.25V
FO = GND
TA = 25°C
CREF = 0.01F
CREF = 0.001F
CREF = 100pF
CREF = 0pF
RSOURCE ()
0
–FS
ERROR
(ppm) –30
–10
10
10k
2495 F14
–50
–70
–40
–20
0
–60
–80
–90
10
100
1k
100k
VCC = 5V
VREF = 5V
VIN+ = 1.25V
VIN– = 3.75V
FO = GND
TA = 25°C
CREF = 0.01F
CREF = 0.001F
CREF = 100pF
CREF = 0pF
相關PDF資料
PDF描述
LTC2495CUHF#TR 16-CH 16-BIT DELTA-SIGMA ADC, SERIAL ACCESS, PQCC38
LTC2615IGN#TR SERIAL INPUT LOADING, 9 us SETTLING TIME, 14-BIT DAC, PDSO16
LTC2620CUFD#PBF SERIAL INPUT LOADING, 7 us SETTLING TIME, 12-BIT DAC, PQCC20
LTC2600CUFD#PBF SERIAL INPUT LOADING, 10 us SETTLING TIME, 16-BIT DAC, PQCC20
LTC2600CUFD#TRPBF SERIAL INPUT LOADING, 10 us SETTLING TIME, 16-BIT DAC, PQCC20
相關代理商/技術參數
參數描述
LTC2496CUHF#PBF 功能描述:IC ADC 16BIT DELTA SIG 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:microPOWER™ 位數:8 采樣率(每秒):1M 數據接口:串行,SPI? 轉換器數目:1 功率耗散(最大):- 電壓電源:模擬和數字 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:24-VFQFN 裸露焊盤 供應商設備封裝:24-VQFN 裸露焊盤(4x4) 包裝:Digi-Reel® 輸入數目和類型:8 個單端,單極 產品目錄頁面:892 (CN2011-ZH PDF) 其它名稱:296-25851-6
LTC2496CUHF#TRPBF 功能描述:IC ADC 16BIT DELTA SIG 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率(每秒):15 數據接口:MICROWIRE?,串行,SPI? 轉換器數目:1 功率耗散(最大):480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN(5x7) 包裝:帶卷 (TR) 輸入數目和類型:16 個單端,雙極;8 個差分,雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2496IUHF#PBF 功能描述:IC ADC 16BIT DELTA SIG 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率(每秒):15 數據接口:MICROWIRE?,串行,SPI? 轉換器數目:1 功率耗散(最大):480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN(5x7) 包裝:帶卷 (TR) 輸入數目和類型:16 個單端,雙極;8 個差分,雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2496IUHF#TRPBF 功能描述:IC ADC 16BIT DELTA SIG 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率(每秒):15 數據接口:MICROWIRE?,串行,SPI? 轉換器數目:1 功率耗散(最大):480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN(5x7) 包裝:帶卷 (TR) 輸入數目和類型:16 個單端,雙極;8 個差分,雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2497CUHF#PBF 功能描述:IC ADC 16BIT W/PGA 38-QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:microPOWER™ 位數:8 采樣率(每秒):1M 數據接口:串行,SPI? 轉換器數目:1 功率耗散(最大):- 電壓電源:模擬和數字 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:24-VFQFN 裸露焊盤 供應商設備封裝:24-VQFN 裸露焊盤(4x4) 包裝:Digi-Reel® 輸入數目和類型:8 個單端,單極 產品目錄頁面:892 (CN2011-ZH PDF) 其它名稱:296-25851-6