參數資料
型號: LT1993IUD-4#TRPBF
廠商: Linear Technology
文件頁數: 3/16頁
文件大?。?/td> 0K
描述: IC DIFF AMP/ADC DRVR 16-QFN
標準包裝: 2,500
放大器類型: 差分
電路數: 2
輸出類型: 差分
轉換速率: 1100 V/µs
-3db帶寬: 900MHz
電流 - 輸入偏壓: 5µA
電壓 - 輸入偏移: 1000µV
電流 - 電源: 100mA
電流 - 輸出 / 通道: 45mA
電壓 - 電源,單路/雙路(±): 4 V ~ 5.5 V,±2 V ~ 2.5 V
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 16-WFQFN 裸露焊盤
供應商設備封裝: 16-QFN-EP(3x3)
包裝: 帶卷 (TR)
LT1993-4
11
19934fa
APPLICATIO S I FOR ATIO
WU
U
Circuit Description
The LT1993-4 is a low noise, low distortion differential
amplier/ADC driver with:
DC to 900MHz –3dB bandwidth
Fixed gain of 4V/V (12dB) independent of RLOAD
100
Ω differential input impedance
Low output impedance
Built-in, user adjustable output ltering
Requires minimal support circuitry
Referring to the block diagram, the LT1993-4 uses a closed-
loop topology which incorporates 3 internal ampliers.
Two of the ampliers (A and B) are identical and drive the
differential outputs. The third amplier (C) is used to set
the output common mode voltage. Gain and input imped-
ance are set by the 100
Ω/200Ω resistors in the internal
feedback network. Output impedance is low, determined
by the inherent output impedance of ampliers A and B,
and further reduced by internal feedback.
The LT1993-4 also includes built-in single-pole output
ltering. The user has the choice of using the unltered
outputs, the ltered outputs (175MHz –3dB lowpass), or
modifying the ltered outputs to alter frequency response
by adding additional components. Many lowpass and
bandpass lters are easily implemented with just one or
two additional components.
The LT1993-4 has been designed to minimize the need
for external support components such as transformers or
AC-coupling capacitors. As an ADC driver, the LT1993-4
requires no external components except for power-supply
bypass capacitors. This allows DC-coupled operation for
applications that have frequency ranges including DC.
At the outputs, the common mode voltage is set via the
VOCM pin, allowing the LT1993-4 to drive ADCs directly. No
output AC-coupling capacitors or transformers are needed.
At the inputs, signals can be differential or single-ended
with virtually no difference in performance. Furthermore,
DC levels at the inputs can be set independently of the
output common mode voltage. These input characteristics
often eliminate the need for an input transformer and/or
AC-coupling capacitors.
Input Impedance and Matching Networks
Because of the internal feedback network, calculation of
the LT1993-4’s input impedance is not straightforward
from examination of the block diagram. Furthermore, the
input impedance when driven differentially is different than
when driven single-ended. When driven differentially, the
LT1993-4’s input impedance is 100
Ω (differential); when
driven single-ended, the input impedance is 75
Ω.
For single-ended 50
Ω applications, a 150Ω shunt match-
ing resistor to ground will result in the proper input
termination (Figure 1). For differential inputs there are
several termination options. If the input source is 50
Ω
differential, then input matching can be accomplished by
either a 100
Ω shunt resistor across the inputs (Figure 3),
or a 49.9
Ω shunt resistor on each of the inputs to ground
(Figure 2).
19934 F01
IF IN
LT1993-4
–INA
–INB
–OUT
+OUT
8
5
+INB
+INA
14
13
15
16
Figure 1. Input Termination for Single-Ended 50
Ω
Input Impedance
Figure 2. Input Termination for Differential 50
Ω Input Impedance
19934 F02
IF IN
IF IN+
LT1993-4
–INA
–INB
–OUT
+OUT
8
5
+INB
+INA
14
13
15
16
Figure 3. Alternate Input Termination for Differential
50
Ω Input Impedance
19934 F03
IF IN
IF IN+
LT1993-4
–INA
–INB
–OUT
+OUT
8
5
+INB
+INA
14
13
15
16
相關PDF資料
PDF描述
LTC6910-3CTS8#TRPBF IC PGA DIGITAL R-R I/O TSOT23-8
LTC6910-2CTS8#TRPBF IC PGA DIGITAL R-R I/O TSOT23-8
1-534237-2 CONN RECEPT 14POS .100 VERT AU
LTC6910-1CTS8#TRPBF IC PGA DIGITAL R-R I/O TSOT23-8
1-535541-0 CONN RECEPT 12POS .100 VERT AU
相關代理商/技術參數
參數描述
LT1994 制造商:LINER 制造商全稱:Linear Technology 功能描述:Precision, Low Power Rail-to-Rail Input/Output
LT1994CDD 制造商:Linear Technology 功能描述:SC-Amps/High Speed, 70MHz Low Noise/Distortion Differential Amplifer
LT1994CDD#PBF 功能描述:IC DIFF AMP/DRIVER LN 8-DFN RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 產品培訓模塊:Differential Circuit Design Techniques for Communication Applications 標準包裝:1 系列:- 放大器類型:RF/IF 差分 電路數:1 輸出類型:差分 轉換速率:9800 V/µs 增益帶寬積:- -3db帶寬:2.9GHz 電流 - 輸入偏壓:3µA 電壓 - 輸入偏移:- 電流 - 電源:40mA 電流 - 輸出 / 通道:- 電壓 - 電源,單路/雙路(±):3 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:16-VQFN 裸露焊盤,CSP 供應商設備封裝:16-LFCSP-VQ 包裝:剪切帶 (CT) 產品目錄頁面:551 (CN2011-ZH PDF) 其它名稱:ADL5561ACPZ-R7CT
LT1994CDD#PBF 制造商:Linear Technology 功能描述:Operational Amplifier (Op-Amp) IC 制造商:Linear Technology 功能描述:IC, DIFFERENTIAL AMP, 70MHZ, 65V/ uS DFN8
LT1994CDD#TR 制造商:Linear Technology 功能描述:DIFF-AMPLIFIER, 70MHZ, 65V/US, DFN-8, No. of Amplifiers:1, Input Offset Voltage: 制造商:Linear Technology 功能描述:DIFF-AMPLIFIER, 70MHZ, 65V/US, DFN-8, No. of Amplifiers:1, Input Offset Voltage:2mV, Bandwidth:70MHz, Amplifier Case Style:DFN, No. of Pins:8, Supply Voltage Range:2.375V to 12.6V, Slew Rate:65V/s, Supply Current:14.8mA, MSL:- , RoHS Compliant: No