參數資料
型號: LH155N
英文描述: Industrial Control IC
中文描述: 工業控制IC
文件頁數: 19/51頁
文件大?。?/td> 288K
代理商: LH155N
19
LH155BA
2.10. Display Timing Generator
The display timing generator generates a timing
clock necessary for internal operation and timing
pulses (LP, FLM, and M) by inputting the master
clock CK or by the oscillation circuit of OSCI and
OSCO.
By setting up master/slave mode (M/S), the state of
timing pulse pins and the timing generator changes.
2.11. Signal Generation to Display Line
Counter, and Display Data
Latching Circuit
Both the clock to the line counter and latching
signals to display data latching circuit from the
display clock (LP) are generated.
Synchronized with the display clock, the line
addresses of display RAM are generated and 128-
bit display data are latched to display-data latching
circuit to output to the LCD drive circuit (SEG
output).
Readout of the display data to the LCD drive circuit
is completely independent of MPU. Therefore, a
MPU that has no relationship the readout operation
of the display data can access it.
2.12. Generation of The Alternating
Signal (M) and The Synchronous
Signal (FLM)
LCD alternating signal (M) and synchronous signal
(FLM) are generated by the display clock (LP). The
FLM generates alternated drive waveform to the
LCD drive circuit. Normally, the FLM generates
alternated drive waveform every frame unit (M-
signal level is reversed every one frame).
But by setting up data (n – 1) in an n-line reverse
register and n-line alternating command (NLIN) at
"H", n-line reverse waveform is generated.
When the LH155BA is used in multi-chip, the
signals of LP, FLM, and M must be sent from
master side in the slave operation.
2.13. Display Data Latching Circuit
Display data latching circuit temporally latches
display data that is output display data to LCD drive
circuit from display RAM every one common period.
Normal display/reverse display, display ON/OFF,
and display all ON commands are operated by
controlling data in the latch. And no data within
display RAM changes.
M/S
PIN
MODE
LP
PIN
M
PIN
FLM
PIN
STATE OF TIMING
GENERATOR
Stop of LP, M, FLM
generation circuit
Operating state
L
Slave Input Input Input
H
Display Timing Pulse Pins and Timing Generator State
Master Output Output Output
相關PDF資料
PDF描述
LH155L Industrial Control IC
LH1554P LCD Display Driver
LH1554M LCD Display Driver
LH1560F 160 OUTPUT LCD SEGMENT / COMMON DRIVER
LH15A1 LCD driver with built-in RAM for 256-color STN-LCDs
相關代理商/技術參數
參數描述
LH155P 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Industrial Control IC
LH155R 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Industrial Control IC
LH1560 制造商:未知廠家 制造商全稱:未知廠家 功能描述:LCD Display Driver
LH1560F 制造商:SHARP 制造商全稱:Sharp Electrionic Components 功能描述:160 OUTPUT LCD SEGMENT / COMMON DRIVER
LH1562 制造商:SHARP 制造商全稱:Sharp Electrionic Components 功能描述:240-output LCD Segment/Common Driver IC