
Ordering number : ENN6246A
30300TH (OT)/30899TH (OT) No.6246-1/9
LC99160GL-TP
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
1/4-Inch Optical Size ITU601 Format Compliant
Color Solid-State Image Sensor
Overview
The LC99160GL is a 1/4-inch optical size frame transfer
CCD solid state image sensor supporting ITU601 format .
In addition to interlace read-out, it enables all-pixel read-
out (progressive scan), in which signals from all-pixeles
can be read in one frame. Using with Sanyo’s signal
processing IC LC99501, it provides NTSC, PAL, or VGA
format video signal.
Features
Supports ITU601 format
Interlace read-out/all-pixel read-out (progressive scan)
Variable speed electronic shutter
Element Structure
Number of effective pixels 736H
× 490V
Number of total pixels 780H
× 510V
Number of optical black pixels :
H direction : 32 pixels (front), 12 pixels (rear)
V direction : 8 pixels (above), 12 pixels (below)
Dummy bit : 4 pixels (H front)
Unit cell size : 5.00 m (H)
× 5.55 m (V)
Complementary color stripe filter (Ye, Cy, Mg)
Parallel gate type CCD sensor
Both imaging and storage areas are composed of 780H
×
510V pixels
3-phase drive for imaging and storage areas,
2-phase drive for horizontal area
Built-in high-sensitivity output amplifier
Package Dimensions
unit: mm
3242
11.8
10.16
0.7
2.54
1.0
7.62
R0.3
R0.25
1.49
1.05
0.44
0.635
1.075
2.0
Resin
Glass
Sensor
4.53
6.0
12.3
14.3
8.0
8.6
1.2
1.015
Optical Center
1.0
(1.2)
R1.0
(R0.6)
(R0.5)
[LC99160GL-TP]
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.