- 您現在的位置：買賣IC網 > PDF目錄358764 > LC75838E (Sanyo Electric Co.,Ltd.) 1/3 Duty LCD Display Drivers with Key Input Function PDF資料下載
參數資料
| 型號： | LC75838E |
| 廠商： | Sanyo Electric Co.,Ltd. |
| 英文描述： | 1/3 Duty LCD Display Drivers with Key Input Function |
| 中文描述： | 1 / 3職務液晶顯示驅動器與關鍵輸入功能 |
| 文件頁數： | 11/24頁 |
| 文件大?。?/td> | 230K |
| 代理商： | LC75838E |
Output Data
1. KD1 to KD30 : Key data
When a key matrix of up to 30 keys is formed from the KS1 to KS6 output pins and the KI1 to KI5 input pins and
one of those keys is pressed, the key output data corresponding to that key will be set to 1. The table shows the
relationship between those pins and the key data bits.
When the KS1/S24 and KS2/S25 output pins are selected to be segment outputs by control data bits K0 and K1 and a
key matrix of up to 20 keys is formed using the KS3 to KS6 output pins and the KI1 to KI5 input pins, the KD1 to
KD10 key data bits will be set to 0.
2. SA : Sleep acknowledge data
This output data bit is set to the state when the key was pressed. Also, while DO will be low in this case, if serial data
is input and the mode is set (to normal or sleep mode) during this period, that mode will be set. SA will be 1 in sleep
mode and 0 in normal mode.
Sleep Mode Functions
Sleep mode is set up by setting S0 or S1 in the control data to 1. The segment outputs will all go low and the common
outputs will also go low, and the oscillator on the OSC pin will stop (it will be started by a key press). This reduces
power dissipation. This mode is cleared by sending control data with both S0 and S1 set to 0. However, note that the
S1/P1 to S4/P4 outputs can be used as general-purpose output ports according to the state of the P0 to P2 control data
bits, even in sleep mode. (See the control data description for details.)
No. 7135-11/24
LC75863E, 75863W
KI1
KI2
KI3
KI4
KI5
KS1/S24
KD1
KD2
KD3
KD4
KD5
KS2/S25
KD6
KD7
KD8
KD9
KD10
KS3
KD11
KD12
KD13
KD14
KD15
KS4
KD16
KD17
KD18
KD19
KD20
KS5
KD21
KD22
KD23
KD24
KD25
KS6
KD26
KD27
KD28
KD29
KD30
相關PDF資料 |
PDF描述 |
|---|---|
| LC7583N | LCD Driver with Level Meter |
| LC75842 | General-Purpose 1/2 Duty LCD Display Driver |
| LC75844 | 1/4 Duty General-Purpose LCD Driver |
| LC7584 | 1/4 Duty General-Purpose LCD Driver |
| LC75842E | General-Purpose 1/2 Duty LCD Display Driver |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LC75838W | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:1/8 to 1/10 Duty General-Purpose LCD Display Drivers |
| LC75838W-E | 制造商:ON Semiconductor 功能描述:LCD DISPLAY DRIVER - Trays |
| LC75838WS-E | 功能描述:LCD 驅動器 RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube |
| LC75839PW | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:1/4 and 1/3-Duty General-Purpose LCD Display Driver |
| LC75839PW-H | 功能描述:LCD 驅動器 LCD DISPLAY DRIVER RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。