- 您現在的位置：買賣IC網 > PDF目錄353812 > JANTXV2N7373 TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 5A I(C) | TO-254AA PDF資料下載
參數資料
| 型號： | JANTXV2N7373 |
| 英文描述： | TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 5A I(C) | TO-254AA |
| 中文描述： | 晶體管|晶體管|叩| 80V的五（巴西）總裁| 5A條一（c）|至254AA |
| 文件頁數： | 2/19頁 |
| 文件大?。?/td> | 103K |
| 代理商： | JANTXV2N7373 |
MIL-PRF-19500/512E
10
4.3.2 Thermal impedance (ZθJX measurements). The ZθJX measurements shall be performed in accordance with
method 3131 of MIL-STD-750.
a.
IM measurement current ...................... 5 mA.
b.
IH forward heating current ................... 200 mA (min).
c.
tH heating time..................................... 25 - 30 ms.
d.
tmd measurement delay time .............. 60 s max.
e.
VCE collector-emitter voltage .............. 10 V dc minimum( same as VH ).
f.
VH collector-emitter heating voltage ... 10 V ( minimum ).
g.
tSW sample window time .................... 10 s ( maximum ).
The maximum limit for ZθJX under these test conditions are ZθJX (max) = 60°C/W. (UA and UB); 67°C/W (2N4029
and 2N4033).
4.3.3 Screening (JANHC and JANKC). Screening of JANHC and JANKC die shall be in accordance with
MIL-PRF-19500, "Discrete Semiconductor Die/Chip Lot Acceptance". Burn-in duration for the JANKC level follows
JANS requirements; the JANHC follows JANTX requirements.
4.4 Conformance inspection. Conformance inspection shall be in accordance with MIL-PRF-19500 and as
specified herein.
4.4.1
Group A inspection. Group A inspection shall be conducted in accordance with appendix E, table V of
MIL-PRF-19500 and table I herein.
4.4.2 Group B inspection. Group B inspection shall be conducted in accordance with the tests and conditions
specified for subgroup testing in table VIa (JANS) of MIL-PRF-19500 and 4.4.2.1 herein. Electrical measurements
(end-points) and delta requirements shall be in accordance with group A, subgroup 2 and 4.5.2 herein: delta
requirements only apply to subgroups B4, and B5. See 4.4.2.2 for JAN, JANTX, and JANTXV group B testing.
Electrical measurements (end-points) and delta requirements for JAN, JANTX, and JANTXV shall be after each step
in 4.4.2.2 and shall be in accordance with group A, subgroup 2 and 4.5.2 herein.
4.4.2.1 Group B inspection, table VIa (JANS) of MIL-PRF-19500.
Subgroup
Method
Condition
B4
1037
VCB = 10 V dc.
B5
1027
VCB = 10 – 20 V dc; PD ≥ 75 percent of maximum rated PT (see 1.3). Option 1:
96 hours min, sample size in accordance with table VIa of MIL-PRF-19500,
adjust TA to achieve TJ = +275°C minimum. Option 2: 216 hours., sample size
= 45, c = 0; adjust TA to achieve TJ = +225°C minimum.
相關PDF資料 |
PDF描述 |
|---|---|
| JANTXV2N918 | TRANSISTOR | BJT | NPN | 15V V(BR)CEO | 50MA I(C) | TO-72 |
| JCLFCMEN-15.000MHZ | Voltage-Controlled Oscillator |
| JCLFCMEN-155.520MHZ | Voltage-Controlled Oscillator |
| JCLFCMEN-170.000MHZ | Voltage-Controlled Oscillator |
| JCLFCMEN-77.760MHZ | Voltage-Controlled Oscillator |
相關代理商/技術參數 |
參數描述 |
|---|---|
| JANTXV2N918 | 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR - Bulk |
| JANTXV2N918UB | 制造商:Semicoa Semiconductors 功能描述:Trans GP BJT NPN 15V 0.05A 3-Pin UB 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR (NPN) - Waffle Pack |
| JANTXV2N930 | 制造商:Microsemi Corporation 功能描述:Trans GP BJT NPN 45V 0.03A 3-Pin TO-18 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR (NPN) - Bulk 制造商:Microsemi Corporation 功能描述:NPN LOW POWER SILICON TRANSISTOR |
| JANTXV2N930UB | 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR (NPN) - Waffle Pack |
| JANTXV4N22 | 功能描述:Optoisolator Transistor with Base Output 1000VDC 1 Channel TO-78-6 制造商:tt electronics/optek technology 系列:- 包裝:散裝 零件狀態:有效 通道數:1 電壓 - 隔離:1000VDC 電流傳輸比（最小值）:25% @ 10mA 電流傳輸比（最大值）:- 打開 / 關閉時間（典型值）:- 上升/下降時間（典型值）:20μs，20μs（最大） 輸入類型:DC 輸出類型:有基極的晶體管 電壓 - 輸出（最大值）:40V 電流 - 輸出/通道:50mA 電壓 - 正向（Vf）（典型值）:1.5V（最大） 電流 - DC 正向（If）:40mA Vce 飽和值（最大值）:300mV 工作溫度:-55°C ~ 125°C 安裝類型:通孔 封裝/外殼:TO-78-6 金屬罐 供應商器件封裝:TO-78-6 標準包裝:1 |
發布緊急采購，3分鐘左右您將得到回復。