參數資料
型號： ISP1161A
廠商： NXP Semiconductors N.V.
英文描述： Full-speed Universal Serial Bus single-chip host and device controller
中文描述： 全速通用串行總線的單芯片主機和設備控制器
文件頁數： 25/134頁
文件大小： 587K
代理商： ISP1161A
Philips Semiconductors
ISP1161A
Full-speed USB single-chip host and device controller
Product data
Rev. 03 — 23 December 2004
25 of 134
9397 750 13962
Koninklijke Philips Electronics N.V. 2004. All rights reserved.
The USB traffic blocks are:
Reset
This includes hardware reset by pin RESET and software reset by the
HcSoftwareReset command (A9H). The reset function will clear all the HC’s
internal control registers to their reset status. After reset, the HCD must initialize
the ISP1161A USB HC by setting some registers.
Initialize HC
It includes:
–
Setting the physical size for the HC’s internal FIFO buffer RAM by setting the
HcITLBufferLength register (2AH - read, AAH - write) and the
HcATLBufferLength register (2BH - read, ABH - write)
–
Setting the HcHardwareConfiguration register according to requirements
–
Clearing interrupt events, if required
–
Enabling interrupt events, if required
–
Setting the HcFmInterval register (0DH - read, 8DH - write)
–
Setting the HC’s Root Hub registers
–
Setting the HcControl register to move the HC into USBOperational state
See also
Section 9.5
.
Entry
The normal entry point. The microprocessor returns to this point when there are
HC requests.
Need USB Traffic
USB devices need the HC to generate USB traffic when they have USB traffic
requests such as:
–
Connecting to or disconnecting from the downstream ports
–
Issuing the Resume signal to the HC
To generate USB traffic, the HCD must enter the USB transaction loop.
Prepare PTD data in
μ
P System RAM
The communication between the HCD and the ISP1161A HC is in the form of
Philips Transfer Descriptor (PTD) data. The PTD data provides USB traffic
information about the commands, status, and USB data packets.
Fig 24. ISP1161A HC USB transaction loop
MGT948
Need
USB traffic
Prepare PTD data in
μ
P system RAM
Initialize
HC
Transfer PTD data into
HC FIFO buffer RAM
HC performs USB transactions
via USB bus I/F
HC informs HCD of
USB traffic results
HC interprets
PTD data
Exit
Entry
HC state =
USBOperational
no
yes
Reset
相關PDF資料
PDF描述
ISP1161ABD Full-speed Universal Serial Bus single-chip host and device controller
ISP1161ABM Full-speed Universal Serial Bus single-chip host and device controller
ISP1161 Full-speed Universal Serial Bus single-chip host and device controller
ISP1161A1 Universal Serial Bus single-chip host and device controller
ISP1161A1BD Universal Serial Bus single-chip host and device controller
相關代理商/技術參數
參數描述
ISP1161A1 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Universal Serial Bus single-chip host and device controller
ISP1161A1BD 功能描述:IC USB HOST/DEVICE CTRLR 64-LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN（6x6） 包裝:* 其它名稱:Q6396337A
ISP1161A1BD,118 功能描述:USB 接口集成電路 USB1.1 HOST &DEVICE RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1161A1BD,151 功能描述:USB 接口集成電路 USB1.1 HOST &DEVICE RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1161A1BD,157 功能描述:USB 接口集成電路 DO NOT USE ORDER -S OR -T PART RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*