參數資料
型號: ISL9208
廠商: Intersil Corporation
英文描述: Multi-Cell Li-ion Battery Pack OCP/Analog Front End(多節鋰離子電池組OCP/模擬前端)
中文描述: 多單元鋰離子電池OCP /模擬前端(多節鋰離子電池組OCP /模擬前端)
文件頁數: 13/28頁
文件大?。?/td> 504K
代理商: ISL9208
13
FN6446.1
November 2, 2007
Status Registers
TABLE 2. CONFIG/OP STATUS REGISTER (ADDR: 00H)
BIT
FUNCTION
DESCRIPTION
7
RESERVED
Reserved for future expansion.
6
RESERVED
Reserved for future expansion.
5
SA
Single AFE
Indicates the device is an ISL9208. This bit is set in the chip and cannot be changed.
4
WKUP
Wakeup pin status
This bit is set and reset by hardware.
When ‘WKPOL’ is HIGH:
’WKUP’ HIGH = WKUP pin > Threshold voltage
‘WKUP’ LOW = WKUP pin < Threshold voltage
When ‘WKPOL’ is LOW:
’WKUP’ HIGH = WKUP pin < Threshold voltage
‘WKUP’ LOW = WKUP pin > Threshold voltage
3
RESERVED
Reserved for future expansion.
2
RESERVED
Reserved for future expansion.
1
RESERVED
Reserved for future expansion.
0
RESERVED
Reserved for future expansion.
TABLE 3. OPERATING STATUS REGISTER (ADDR: 01H)
BIT
FUNCTION
DESCRIPTION
7
RESERVED
Reserved for future expansion.
6
RESERVED
Reserved for future expansion.
5
XOT
Ext Over-temp
This bit is set to “1” when the external thermistor indicates an over-temperature condition. If the temperature
condition has cleared, this bit is reset when the register is read.
4
IOT
Int Over-temp
This bit is set to “1” when the internal thermistor indicates an over-temperature condition. If the temperature condition
has cleared, this bit is reset when the register is read.
3
LDFAIL
Load Fail (VMON)
When the function is enabled, this bit is set to “1” by hardware when a discharge overcurrent or short circuit condition
occurs and the load remains heavy. When the load fail condition is cleared or under a light load, the bit is reset when
the register is read.
2
DSC
Short Circuit
This bit is set by hardware when a short circuit condition occurs during discharge. When the discharge short circuit
condition is removed, the bit is reset when the register is read.
1
DOC
Discharge OC
This bit is set by hardware when an overcurrent condition occurs during discharge. When the discharge overcurrent
condition is removed, the bit is reset when the register is read.
0
COC
Charge OC
This bit is set by hardware when an overcurrent condition occurs during charge. When the charge overcurrent
condition is removed, the bit is reset when the register is read.
ISL9208
相關PDF資料
PDF描述
ISL9214 Li-ion/Li-Polymer Battery Charger Accepting Two Power Sources
ISL9214RZ Li-ion/Li-Polymer Battery Charger Accepting Two Power Sources
ISL9214RZ-T Li-ion/Li-Polymer Battery Charger Accepting Two Power Sources
ISL9440 Triple, 180∑ Out-of-Phase, Step-Down PWM and Single Linear Controller
ISL9440A Triple, 180∑ Out-of-Phase, Step-Down PWM and Single Linear Controller
相關代理商/技術參數
參數描述
ISL9208_0711 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Multi-Cell Li-ion Battery Pack OCP/Analog Front End
ISL9208EVAL1Z 制造商:Intersil Corporation 功能描述:ISL9208 EVALUATION BOARD 1 - ROHS COMPLIANT - QFN - Bulk
ISL9208EVAL2Z 功能描述:EVAL BOARD 2 FOR ISL9208 RoHS:是 類別:編程器,開發系統 >> 評估演示板和套件 系列:* 標準包裝:1 系列:PCI Express® (PCIe) 主要目的:接口,收發器,PCI Express 嵌入式:- 已用 IC / 零件:DS80PCI800 主要屬性:- 次要屬性:- 已供物品:板
ISL9208IRZ 功能描述:IC MULTI-CELL LI-ION PROT 32-QFN RoHS:是 類別:集成電路 (IC) >> PMIC - 電池管理 系列:- 標準包裝:2,000 系列:Impedance Track™ 功能:燃料,電量檢測計/監控器 電池化學:鋰離子(Li-Ion) 電源電壓:2.4 V ~ 2.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:20-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:20-TSSOP 包裝:帶卷 (TR) 產品目錄頁面:1020 (CN2011-ZH PDF) 配用:BQ27350EVM-ND - BQ27350EVM 其它名稱:296-21665-2
ISL9208IRZ-T 功能描述:IC MULTI-CELL LI-ION PROT 32-QFN RoHS:是 類別:集成電路 (IC) >> PMIC - 電池管理 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 功能:電池監控器 電池化學:堿性,鋰離子,鎳鎘,鎳金屬氫化物 電源電壓:1 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 供應商設備封裝:SOT-6 包裝:帶卷 (TR)