參數資料
型號: IDT82V2616BBG
廠商: IDT, Integrated Device Technology Inc
文件頁數: 11/99頁
文件大小: 0K
描述: IC INVERSE MUX 16CH ATM 272-PBGA
標準包裝: 1
應用: 無線
接口: Utopia
電源電壓: 2.97 V ~ 3.63 V
封裝/外殼: 260-BGA
供應商設備封裝: 260-PBGA(19x19)
包裝: 托盤
安裝類型: 表面貼裝
其它名稱: 82V2616BBG
INTERFACE
19
December 4, 2006
IDT82V2616
Inverse Multiplexing for ATM
3INTERFACE
3.1
UTOPIA INTERFACE
The Utopia interface operates in Level 2 mode. The IDT82V2616
supports up to 16 Utopia Level 2 ports. Each port is assigned an
address ranging from 0 to 30. The address value of 31 is reserved and
should not be used. All the 31 ports can be individually enabled or
disabled by ConfigUtopiaIF command.
Each IMA group or UNI link corresponds to a port. For each IMA
group, the port address can be assigned by ConfigGroupInterface
command. For each UNI link, the port address can be assigned by
ConfigUNILink command. Inside the device, each port corresponds to
a GCF (Group Cell FIFO) which is 2 cells deep.
The IDT82V2616 uses cell level handshake for cell transfer. One
entire cell is transferred before another port can be selected. The start of
a cell is marked by TxSOC and RxSOC signals in the transmit and the
receive directions respectively. These two signals are active during the
first byte of a cell.
3.1.1
UTOPIA LOOPBACK FUNCTION
For diagnostic purpose, the capability to loop back all Utopia traffic to
Utopia bus is provided. This loopback is called Utopia loopback and can
be enabled by ConfigLoopMode command. In this mode, cells are
taken from TGCFs (Transmit Group Cell FIFO) and sent to the respec-
tive RGCFs (Receive Group Cell FIFO). When in Utopia loopback mode,
cells will not be transmitted to the line interface. Refer to Figure-3.
Figure-3 Utopia Loopback
UTOPIA Interface
Tx
Group
Cell
FIFO 1
Rx
Group
Cell
FIFO 1
Tx
Group
Cell
FIFO 0
Rx
Group
Cell
FIFO 0
……
相關PDF資料
PDF描述
IDT88K8483BRI IC SPI-4 EXCHANGE 3PORT 672-BGA
IDT88P8341BHI IC SPI3-SPI4 EXCHANGE 820-PBGA
IDT88P8342BHI IC SPI3-SPI4 EXCHANGE 820-PBGA
IDT88P8344BHI IC SPI3-SPI4 EXCHANGE 820-PBGA
IDT89H24NT24G2ZBHLG IC PCI SW 24LANE 24PORT 324BGA
相關代理商/技術參數
參數描述
IDT82V3001A 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:WAN PLL WITH SINGLE REFERENCE INPUT
IDT82V3001A_08 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:WAN PLL WITH SINGLE REFERENCE INPUT
IDT82V3001APV 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:WAN PLL WITH SINGLE REFERENCE INPUT
IDT82V3001APVG 功能描述:IC PLL WAN W/SGL REF INP 56SSOP RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 專用 系列:- 標準包裝:1 系列:- 類型:時鐘/頻率發生器,多路復用器 PLL:是 主要目的:存儲器,RDRAM 輸入:晶體 輸出:LVCMOS 電路數:1 比率 - 輸入:輸出:1:2 差分 - 輸入:輸出:無/是 頻率 - 最大:400MHz 電源電壓:3 V ~ 3.6 V 工作溫度:0°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:Digi-Reel® 其它名稱:296-6719-6
IDT82V3001APVG8 功能描述:IC PLL WAN W/SGL REF INP 56-SSOP RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 專用 系列:- 標準包裝:1,500 系列:- 類型:時鐘緩沖器/驅動器 PLL:是 主要目的:- 輸入:- 輸出:- 電路數:- 比率 - 輸入:輸出:- 差分 - 輸入:輸出:- 頻率 - 最大:- 電源電壓:3.3V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP(0.209",5.30mm 寬) 供應商設備封裝:28-SSOP 包裝:帶卷 (TR) 其它名稱:93786AFT