參數資料
型號： IDT82V2088BB
廠商： IDT, Integrated Device Technology Inc
文件頁數： 19/78頁
文件大?。?/td> 0K
描述： IC LIU T1/J1/E1 8CH 208-BGA
標準包裝： 10
類型： 線路接口裝置（LIU）
規程： E1
電源電壓： 3.13 V ~ 3.47 V
安裝類型： 表面貼裝
封裝/外殼： 208-BGA
供應商設備封裝： 208-PBGA（17x17）
包裝： 托盤
其它名稱： 82V2088BB
26
INDUSTRIAL
TEMPERATURE RANGES
OCTAL CHANNEL T1/E1/J1 LONG HAUL/SHORT HAUL LINE INTERFACE UNIT
3.5
LOS AND AIS DETECTION
3.5.1
LOS DETECTION
The Loss of Signal Detector monitors the amplitude of the incoming sig-
nal level and pulse density of the received signal on RTIPn and RRINGn.
LOS declare (LOS=1)
A LOS is detected when the incoming signal has “no transitions”, i.e.,
when the signal level is less than Q dB below nominal for N consecutive
pulse intervals. Here N is defined by LAC bit (MAINT0, 0AH...). LOS will be
declared by pulling LOSn pin to high (LOS=1) and LOS interrupt will be gen-
erated if it is not masked.
LOS clear (LOS=0)
The LOS is cleared when the incoming signal has “transitions”, i.e.,
when the signal level is greater than P dB below nominal and has an aver-
age pulse density of at least 12.5% for M consecutive pulse intervals, start-
ing with the receipt of a pulse. Here M is defined by LAC bit (MAINT0,
0AH...). LOS status is cleared by pulling LOSn pin to low.
Figure-14 LOS Declare and Clear
LOS detect level threshold
In short haul mode, the amplitude threshold Q is fixed on 800 mVpp,
while P=Q+200 mVpp (200 mVpp is the LOS level detect hysteresis).
In long haul mode, the value of Q can be selected by LOS[4:0] bit
(RCF1, 08H...), while P=Q+4 dB (4 dB is the LOS level detect hysteresis).
The LOS[4:0] default value is 10101 (-46 dB).
Criteria for declare and clear of a LOS detect
The detection supports the ANSI T1.231 and I.431 for T1/J1 mode and
G.775 and ETSI 300233/I.431 for E1 mode. The criteria can be selected
by LAC bit (MAINT0, 0AH...) and T1E1 bit (GCF0, 40H).
Table-17 and Table-18 summarize LOS declare and clear criteria for
both short haul and long haul application.
All Ones output during LOS
On the system side, the RDPn/RDNn will reflect the input pulse “transi-
tion” at the RTIPn/RRINGn side and output recovery clock (but the quality
of the output clock can not be guaranteed when the input level is lower than
the maximum receive sensitivity) when AISE bit (MAINT0, 0AH...) is 0; or
output All Ones as AIS when AISE bit (MAINT0, 0AH...) is 1. In this case
RCLKn output is replaced by MCLK.
On the line side, the TTIPn/TRINGn will output All Ones as AIS when
ATAO bit (MAINT0, 0AH...) is 1. The All Ones pattern uses MCLK as the
reference clock.
LOS indicator is always active for all kinds of loopback modes.
signal level<Q
(observing windows= N)
(observing windows= M)
signal level>P
density=OK
LOS=1
LOS=0
Table-17 LOS Declare and Clear Criteria for Short Haul Mode
Control bit
LOS declare threshold
LOS clear threshold
T1E1
LAC
1=T1/J1
0=T1.231
Level < 800 mVpp
N=175 bits
Level > 1 Vpp
M=128 bits
12.5% mark density
<100 consecutive zeroes
1=I.431
Level < 800 mVpp
N=1544 bits
Level > 1 Vpp
M=128 bits
12.5% mark density
<100 consecutive zeroes
0=E1
0=G.775
Level < 800 mVpp
N=32 bits
Level > 1 Vpp
M=32 bits
12.5% mark density
<16 consecutive zeroes
1=I.431/ETSI
Level < 800 mVpp
N=2048 bits
Level > 1 Vpp
M=32 bits
12.5% mark density
<16 consecutive zeroes
相關PDF資料
PDF描述
IDT72V263L7-5PF IC FIFO 8192X18 7-5NS 80QFP
V48B15M250BG2 CONVERTER MOD DC/DC 15V 250W
IDT82V2088BBG IC LINE INTERFACE UNIT 208-PBGA
V48B15M250BF3 CONVERTER MOD DC/DC 15V 250W
IDT72V263L10PFI IC FIFO 8192X18 10NS 80QFP
相關代理商/技術參數
參數描述
IDT82V2088BBG 功能描述:IC LINE INTERFACE UNIT 208-PBGA RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
IDT82V2088DR 功能描述:IC LIU T1/J1/E1 8CH 208-TQFP RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
IDT82V2088DRG 功能描述:IC LIU T1/J1/E1 8CH 208-TQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
IDT82V2108 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:T1 / E1 / J1 OCTAL FRAMER
IDT82V2108BB 功能描述:IC FRAMER T1/J1/E1 8CH 144-BGA RoHS:否 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN（6x6） 包裝:* 其它名稱:Q6396337A
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*