參數資料
型號： IDT72V51433L7-5BB
廠商： IDT, Integrated Device Technology Inc
文件頁數： 16/50頁
文件大?。?/td> 0K
描述： IC FLOW CTRL MULTI QUEUE 256-BGA
標準包裝： 1
類型： 多隊列流量控制
安裝類型： 表面貼裝
封裝/外殼： 256-BBGA
供應商設備封裝： 256-BGA（17x17）
包裝： 托盤
其它名稱： 72V51433L7-5BB
23
IDT72V51433/72V51443/72V51453 3.3V, MULTI-QUEUE FLOW-CONTROL DEVICES
(16 QUEUES) 18 BIT WIDE CONFIGURATION 589,824, 1,179,648 and 2,359,296 bits
COMMERCIAL AND INDUSTRIAL
TEMPERATURE RANGES
TABLE 4 — FLAG OPERATION BOUNDARIES & TIMING (CONTINUED)
NOTE:
n = Almost Empty Offset value.
Default values: if DF is LOW at Master Reset then n = 8
if DF is HIGH at Master Reset then n = 128
PAEn Timing
Assertion:
Read Operation to
PAEn LOW: 2 RCLK* + tPAE
De-assertion: Write to
PAEn HIGH: tSKEW3 + RCLK* + tPAE
If tSKEW3 is violated there may be 1 added clock: tSKEW3 + 2 RCLK* + tPAE
* If a queue switch is occurring on the read port at the point of flag assertion or de-assertion
there may be one additional RCLK clock cycle delay.
Programmable Almost Empty Flag Bus,
PAEn Boundary
I/O Set-Up
PAEn Boundary Condition
In18 to out18 or In9 to out9
PAEn Goes HIGH after
(Both ports selected for same queue when the 1st
n+2 Writes
Word is written in until the boundary is reached)
(see note below for timing)
In18 to out18 or In9 to out9
PAEn Goes HIGH after
(Write port only selected for same queue when the n+1 Writes
1st Word is written in until the boundary is reached) (see note below for timing)
In18 to out9
PAEn Goes HIGH after n+1
Writes (see below for timing)
In9 to out18
PAEn Goes HIGH after
(Both ports selected for same queue when the 1st
([n+2] x 2) Writes
Word is written in until the boundary is reached)
(see note below for timing)
In9 to out18
PAEn Goes HIGH after
(Write port only selected for same queue when the ([n+1] x 2) Writes
1st Word is written in until the boundary is reached) (see note below for timing)
Programmable Almost Full Flag,
PAF & PAFn Bus Boundary
I/O Set-Up
PAF & PAFn Boundary
In18 to out18 or In9 to out9
PAF/PAFn Goes LOW after
(Both ports selected for same queue when the 1st
D+1-m Writes
Word is written in until the boundary is reached)
(see note below for timing)
In18 to out18 or In9 to out9
PAF/PAFn Goes LOW after
(Write port only selected for same queue when the D-m Writes
1st Word is written in until the boundary is reached) (see note below for timing)
In18 to out9
PAF/PAFn Goes LOW after
D-mWrites(seebelowfortiming)
In9 to out18
PAF/PAFn Goes LOW after
([D+1-m] x 2) Writes
(see note below for timing)
NOTE:
D = Queue Depth
m = Almost Full Offset value.
Default values:
if DF is LOW at Master Reset then m = 8
if DF is HIGH at Master Reset then m= 128
PAF Timing
Assertion:
Write Operation to
PAF LOW: 2 WCLK + tWAF
De-assertion: Read to
PAF HIGH: tSKEW2 + WCLK + tWAF
If tSKEW2 is violated there may be 1 added clock: tSKEW2 + 2 WCLK + tWAF
PAFn Timing
Assertion:
Write Operation to
PAFn LOW: 2 WCLK* + tPAF
De-assertion: Read to
PAFn HIGH: tSKEW3 + WCLK* + tPAF
If tSKEW3 is violated there may be 1 added clock: tSKEW3 + 2 WCLK* + tPAF
* If a queue switch is occurring on the write port at the point of flag assertion or de-assertion
there may be one additional WCLK clock cycle delay.
NOTE:
n = Almost Empty Offset value.
Default values:
if DF is LOW at Master Reset then n = 8
if DF is HIGH at Master Reset then n = 128
PAE Timing
Assertion:
Read Operation to
PAE LOW: 2 RCLK + tRAE
De-assertion: Write to
PAE HIGH: tSKEW2 + RCLK + tRAE
If tSKEW2 is violated there may be 1 added clock: tSKEW2 + 2 RCLK + tRAE
Programmable Almost Empty Flag,
PAE Boundary
I/O Set-Up
PAE Assertion
In18 to out18 or In9 to out9
PAE Goes HIGH after n+2
(Both ports selected for same queue when the 1st
Writes
Word is written in until the boundary is reached)
(see note below for timing)
In18 to out9
PAE Goes HIGH after n+1
(Both ports selected for same queue when the 1st
Writes
Word is written in until the boundary is reached)
(see note below for timing)
In9 to out18
PAE Goes HIGH after
(Both ports selected for same queue when the 1st
([n+2] x 2) Writes
Word is written in until the boundary is reached)
(see note below for timing)
相關PDF資料
PDF描述
LFEC10E-4QN208I IC FPGA 10.2KLUTS 208PQFP
MIC5320-SFYMT TR IC REG LDO 3.3V/1.5V .15A 6-TMLF
MIC5310-PPYML TR IC REG LDO 3V .15A 8-MLF
EB41-S0C5040X CONN EDGEBOARD DUAL 100POS 3A
LFEC10E-5QN208C IC FPGA 10.2KLUTS 147I/O 208QFP
相關代理商/技術參數
參數描述
IDT72V51433L7-5BB8 功能描述:IC FLOW CTRL MULTI QUEUE 256-BGA RoHS:否 類別:集成電路 (IC) >> 專用 IC 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
IDT72V51433L7-5BBI 功能描述:IC FLOW CTRL MULTI QUEUE 256-BGA RoHS:否 類別:集成電路 (IC) >> 專用 IC 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
IDT72V51436L6BB 功能描述:IC FLOW CTRL MULTI QUEUE 256-BGA RoHS:否 類別:集成電路 (IC) >> 專用 IC 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
IDT72V51436L6BB8 功能描述:IC FLOW CTRL MULTI QUEUE 256-BGA RoHS:否 類別:集成電路 (IC) >> 專用 IC 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
IDT72V51436L7-5BB 功能描述:IC FLOW CTRL MULTI QUEUE 256-BGA RoHS:否 類別:集成電路 (IC) >> 專用 IC 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*