IDT723652/723662/723672 CMOS SyncBiFIFOTM 2,048 x 36 x 2, 4,096 x 36 x 2 " />
參數資料
型號： IDT723652L12PF
廠商： IDT, Integrated Device Technology Inc
文件頁數： 4/29頁
文件大?。?/td> 0K
描述： IC FIFO BI SYNC 4096X36 120QFP
標準包裝： 45
系列： 7200
功能： 同步
存儲容量： 147K（4K x 36）
數據速率： 83MHz
訪問時間： 12ns
電源電壓： 4.5 V ~ 5.5 V
工作溫度： 0°C ~ 70°C
安裝類型： 表面貼裝
封裝/外殼： 120-LQFP
供應商設備封裝： 120-TQFP（14x14）
包裝： 托盤
其它名稱： 723652L12PF
12
COMMERCIALTEMPERATURERANGE
IDT723652/723662/723672 CMOS SyncBiFIFOTM
2,048 x 36 x 2, 4,096 x 36 x 2 and 8,192 x 36 x 2
a write pointer and read pointer comparator that indicates when the FIFO
memory status is empty, empty+1, or empty+2.
In FWFT mode, from the time a word is written to a FIFO, it can be shifted
to the FIFO output register in a minimum of three cycles of the Output Ready
flag synchronizing clock. Therefore, an Output Ready flag is LOW if a word
inmemoryisthenextdatatobesenttotheFlFOoutputregisterandthreecycles
of the port Clock that reads data from the FIFO have not elapsed since the time
the word was written. The Output Ready flag of the FIFO remains LOW until
the third LOW-to-HIGH transition of the synchronizing clock occurs, simulta-
neously forcing the Output Ready flag HIGH and shifting the word to the FIFO
output register.
In IDT Standard mode, from the time a word is written to a FIFO, the Empty
Flagwillindicatethepresenceofdataavailableforreadinginaminimumoftwo
cyclesoftheEmptyFlagsynchronizingclock. Therefore,anEmptyFlagisLOW
if a word in memory is the next data to be sent to the FlFO output register and
two cycles of the port Clock that reads data from the FIFO have not elapsed
since the time the word was written. The Empty Flag of the FIFO remains LOW
until the second LOW-to-HIGH transition of the synchronizing clock occurs,
forcing the Empty Flag HIGH; only then can data be read.
A LOW-to-HIGH transition on an Empty/Output Ready flag synchronizing
clockbeginsthefirstsynchronizationcycleofawriteiftheclocktransitionoccurs
attimetSKEW1 orgreaterafterthewrite. Otherwise,thesubsequentclockcycle
Synchronized
Number of Words in FIFO(1,2)
to CLKB
to CLKA
IDT723652
(3)
IDT723662
(3)
IDT723672
(3)
EFB/ORB
AEB
AFA
FFA/IRA
000
L
H
1 to X1
H
L
H
(X1+1) to [2,048-(Y1+1)]
(X1+1) to [4,096-(Y1+1)]
(X1+1) to [8,192-(Y1+1)]
H
(2,048-Y1) to 2,047
(4,096-Y1) to 4,095
(8,192-Y1) to 8,191
H
L
H
2,048
4,096
8,192
H
L
SYNCHRONIZED FIFO FLAGS
EachFIFOissynchronizedtoitsportclockthroughatleasttwoflip-flopstages.
This is done to improve flag signal reliability by reducing the probability of
metastable events when CLKA and CLKB operate asynchronously to one
another.
EFA/ORA,AEA,FFA/IRA,andAFAaresynchronizedtoCLKA. EFB/
ORB,
AEB, FFB/IRB, and AFB are synchronized to CLKB. Tables 4 and 5
show the relationship of each port flag to FIFO1 and FIFO2.
EMPTY/OUTPUT READY FLAGS (
EFA/ORA, EFB/ORB)
These are dual purpose flags. In the FWFT mode, the Output Ready (ORA,
ORB) function is selected. When the Output Ready flag is HIGH, new data is
present in the FIFO output register. When the Output Ready flag is LOW, the
previous data word is present in the FIFO output register and attempted FIFO
reads are ignored.
In the IDT Standard mode, the Empty Flag (
EFA,EFB)functionisselected.
When the Empty Flag is HIGH, data is available in the FIFO’s RAM for reading
to the output register. When the Empty Flag is LOW, the previous data word
is present in the FIFO output register and attempted FIFO reads are ignored.
The Empty/Output Ready flag of a FIFO is synchronized to the port clock
that reads data from its array. For both the FWFT and IDT Standard modes,
the FIFO read pointer is incremented each time a new word is clocked to its
outputregister. ThestatemachinethatcontrolsanOutputReadyflagmonitors
NOTES:
1. When a word loaded to an empty FIFO is shifted to the output register, its previous FIFO memory location is free.
2. Data in the output register does not count as a "word in FIFO memory". Since in FWFT mode, the first word written to an empty FIFO goes unrequested to the output register (no
read operation necessary), it is not included in the FIFO memory count.
3. X1 is the Almost-Empty offset for FIFO1 used by
AEB. Y1 is the Almost-Full offset for FIFO1 used by AFA. Both X1 and Y1 are selected during a reset of FIFO1 or programmed from
port A.
4. The ORB and IRA functions are active during FWFT mode; the
EFB and FFA functions are active in IDT Standard mode.
TABLE 4 — FIFO1 FLAG OPERATION (IDT STANDARD AND FWFT MODES)
Synchronized
Number of Words in FIFO(1,2)
to CLKA
to CLKB
IDT723652
(3)
IDT723662
(3)
IDT723672
(3)
EFA/ORA
AEA
AFB
FFB/IRB
000
L
H
1 to X2
H
L
H
(X2+1) to [2,048-(Y2+1)]
(X2+1) to [4,096-(Y2+1)]
(X2+1) to [8,192-(Y2+1)]
H
(2,048-Y2) to 2,047
(4,096-Y2) to 4,095
(8,192-Y2) to 8,191
H
L
H
2,048
4,096
8,192
H
L
NOTES:
1. When a word loaded to an empty FIFO is shifted to the output register, its previous FIFO memory location is free.
2. Data in the output register does not count as a "word in FIFO memory". Since in FWFT mode, the first word written to an empty FIFO goes unrequested to the output register (no
read operation necessary), it is not included in the FIFO memory count.
3. X2 is the Almost-Empty offset for FIFO2 used by
port A.
4. The ORA and IRB functions are active during FWFT mode; the
EFA and FFB functions are active in IDT Standard mode.
TABLE 5 — FIFO2 FLAG OPERATION (IDT STANDARD AND FWFT MODES)
相關PDF資料
PDF描述
V48A15T500BL3 CONVERTER MOD DC/DC 15V 500W
MAX11057ECB+ IC ADC 14BIT PAR 250KSPS 64TQFP
V48A12T500B2 CONVERTER MOD DC/DC 12V 500W
IDT72V3690L7-5PF IC FIFO SS 32768X36 7-5N 128TQFP
MAX147BEAP+T IC ADC 12BIT SERIAL 20-SSOP
相關代理商/技術參數
參數描述
IDT723652L12PF8 功能描述:IC FIFO BI SYNC 4096X36 120QFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:7200 標準包裝:15 系列:74F 功能:異步 存儲容量:256（64 x 4） 數據速率:- 訪問時間:- 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:24-DIP（0.300"，7.62mm） 供應商設備封裝:24-PDIP 包裝:管件 其它名稱:74F433
IDT723652L12PQF 功能描述:IC FIFO BI SYNC 4096X36 132QFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:7200 標準包裝:15 系列:74F 功能:異步 存儲容量:256（64 x 4） 數據速率:- 訪問時間:- 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:24-DIP（0.300"，7.62mm） 供應商設備封裝:24-PDIP 包裝:管件 其它名稱:74F433
IDT723652L15PF 功能描述:IC FIFO BI SYNC 4096X36 120QFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:7200 標準包裝:15 系列:74F 功能:異步 存儲容量:256（64 x 4） 數據速率:- 訪問時間:- 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:24-DIP（0.300"，7.62mm） 供應商設備封裝:24-PDIP 包裝:管件 其它名稱:74F433
IDT723652L15PF8 功能描述:IC FIFO BI SYNC 4096X36 120QFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:7200 標準包裝:15 系列:74F 功能:異步 存儲容量:256（64 x 4） 數據速率:- 訪問時間:- 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:24-DIP（0.300"，7.62mm） 供應商設備封裝:24-PDIP 包裝:管件 其它名稱:74F433
IDT723652L15PQF 功能描述:IC FIFO BI SYNC 4096X36 132QFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:7200 標準包裝:15 系列:74F 功能:異步 存儲容量:256（64 x 4） 數據速率:- 訪問時間:- 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:24-DIP（0.300"，7.62mm） 供應商設備封裝:24-PDIP 包裝:管件 其它名稱:74F433
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*