參數資料
型號： HSP45256JI-25
廠商： INTERSIL CORP
元件分類： 數字信號處理外設
英文描述： Binary Correlator
中文描述： 8-BIT, DSP-CORRELATOR, PQCC84
封裝： PLASTIC, LCC-84
文件頁數： 4/23頁
文件大?。?/td> 154K
代理商： HSP45256JI-25
4
Pin Descriptions
SYMBOL
PLCC PIN NUMBER
TYPE
DESCRIPTION
V
CC
16, 33, 63
The +5V power supply pin.
GND
14, 35, 55, 70, 77
Ground.
DIN0-7
17-24
I
The DIN0-7 bus consists of eight single data input pins. The assignment of the active pins is
determined by the configuration. Data is loaded synchronous to the rising edge of CLK. DIN0
is the LSB.
DOUT0-7
60-62, 64-68
O
The DOUT0-7 bus is the data output of the correlation array. The format of the output is de-
pendent on the window configuration and bit weighting. DOUT0 is the LSB.
CLK
15
I
System Clock. Positive edge triggered.
CASIN0-12
1-13
I
CASIN0-12 allows multiple correlators to be cascaded by connecting CASOUT0-12 of one
correlator to CASIN0-12 of another. The CASIN bus is added internally to the correlation
score to form CASOUT. CASIN0 is the LSB.
CASOUT0-12
69, 71-76, 78-83
O
CASOUT0-12 is the output correlation score. This value is the delayed sum of all the 256
taps of one chip and CASIN0-12. When the part is configured to act as two independent cor-
relators, CASOUT0-8 represents the correlation score for the first correlator while the sec-
ond correlation score is available on the AUXOUT0-8 bus. In this configuration, the
cascading feature is no longer an option. CASOUT0 is the LSB.
OEC
84
I
OEC is the output enable for CASOUT0-12. When OEC is high, the output is three-stated.
Processing is not interrupted by this pin (active low).
TXFR
36
I
TXFR is a synchronous clock enable signal that allows the loading of the reference and mask
inputs from the preload register to the correlation array. Data is transferred on the rising edge
of CLK while TXFR is low (active low).
DREF0-7
25-32
I
DREF0-7 is an 8-bit wide data reference input. This is the input data bus used to load the
reference data. RLOAD going active initiates the loading of the reference registers. This in-
put bus is used to load the reference registers of the correlation array. The manner in which
the reference data is loaded is determined by the window configuration. If the window con-
figuration is 1 x 256, the reference bits are loaded one at a time over DREF7. When the
HSP45256 is configured as an 8 x 32 array, the data is loaded into all stages in parallel. In
this case, DREF7 is the reference data for the first stage and DREF0 is the reference data
for the eighth stage. The contents of the reference data registers are not affected by chang-
ing the window configuration. DREF0 is the LSB.
RLOAD
34
I
RLOAD enables loading of the reference registers. Data on DREF0-7 is loaded into the pre-
load registers on the rising edge of RLOAD. This data is transferred into the correlation array
by TXFR (active low).
DCONT0-7
41-48
I
DCONT0-7 is the control data input which is used to load the mask bit for each tap, as well
as the configuration registers. The mask data is sequentially loaded into the eight stages in
the same manner as the reference data. DCONT0 is the LSB.
CLOAD
37
I
CLOAD enables the loading of the data on DCONT0-7. The destination of this data is con-
trolled by A0-2 (active low).
A0-2
38-40
I
A0-2 is a 3-bit address that determines what function will be performed when CLOAD is ac-
tive. This address bus is set up with respect to the rising edge of the load signal, CLOAD. A0
is the LSB.
AUXOUT0-8
50-54, 56-59
O
AUXOUT0-8 is a 9-bit bus that provides either the data reference output in the single corre-
lation configuration or the 9-bit correlation score of the second correlator, in the dual corre-
lator configuration. When the user programs the chip to be two separate correlators, the
score of the second correlator is output on this bus. When the user has programmed the chip
to be one correlator, AUXOUT0-7 represents the reference data out, with the state of
AUXOUT8 undefined. AUXOUT0 is the LSB.
OEA
49
I
The OEA signal is the output enable for the AUXOUT0-8 output. When OEA is high, the out-
put is disabled. Processing is not interrupted by this pin (active low).
HSP45256
相關PDF資料
PDF描述
HSP45256JI-33 Binary Correlator
HSP45256 Binary Correlator
HSP45256883 Binary Correlator
HSP45256JC-25 Binary Correlator
HSP45256JC-33 Binary Correlator
相關代理商/技術參數
參數描述
HSP45256JI-33 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Binary Correlator
HSP45314 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:CommLinkTM Direct Digital Synthesizer
HSP45314_01 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:CommLinkTM Direct Digital Synthesizer
HSP45314VI 制造商:Rochester Electronics LLC 功能描述:DIRECT DIGITAL SYNTHESIZER - Bulk
HS-P4-775 制造商:Itox, Inc. 功能描述:P4 SOCKET 775 HEAT SINK - Bulk
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*