
180
Absolute Maximum Ratings
Thermal Information
Voltage Between +V and -V Terminals . . . . . . . . . . . . . . . . . . . 40V
V1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7V
VREF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V
Logic Input Voltage. . . . . . . . . . . . . . . . . . . . GND -0.3V to V1 +0.3V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Output Short Circuit Duration . . . . . . . . . . . . . . . . . . . . . See Note 1
Output Over-Voltage Protection . . . . . . . . . . . . . . . . . . . See Note 2
Recommended Operating Conditions
Operating Voltage
+V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+15V
± 10%
-V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -15V
± 10%
V1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V ± 5%
VREF (For ARINC 429) . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V ± 5%
Operating Temperature Range
HS-3182-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0oC to +70oC
HS-3182-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to +125oC
Thermal Resistance (Typical)
θJA
θJC
SBDIP Package. . . . . . . . . . . . . . . . . .
75oC/W
18oC/W
CLCC Package . . . . . . . . . . . . . . . . . .
60oC/W
14oC/W
Storage Temperature Range . . . . . . . . . . . . . . . . .-65oC to +150oC
Maximum Junction Temperature. . . . . . . . . . . . . . . . . . . . . . +175oC
Maximum Lead Temperature (Soldering 10s). . . . . . . . . . . . +300oC
Die Characteristics
Transistor Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
NOTES:
1. Heat sink may be required for 100K bits/s at +125oC and output short circuit at +125oC.
2. The fuses used for output over-voltage protection may be blown by a fault at each output of greater than
± 6.5V relative to GND.
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
DC Electrical Performance Specifications
DC PARAMETER
SYMBOL
(NOTE 1)
CONDITIONS
MIN
MAX
UNITS
Supply Current +V (Operating)
ICCOP (+V)
No Load (0-100K bits/s)
-
16
mA
Supply Current -V (Operating)
ICCOP (-V)
No Load (0-100K bits/s)
-16
-
mA
Supply Current V1 (Operating)
ICCOP (V1)
No Load (0-100K bits/s)
-
975
A
Supply Current VREF (Operating)
ICCOP (VREF) No Load (0-100K bits/s)
-1.0
-
mA
Logic “1” Input Voltage
VIH
2.0
-
V
Logic “0” Input Voltage
VIL
-0.5
V
Output Voltage High (Output to GND)
VOH
No Load (0-100K bits/s)
VREF
(-250mV)
VREF
(+250mV)
Output Voltage Low (Output to GND)
VOL
No Load (0-100K bits/s)
-VREF
(-250mV)
-VREF
(+250mV)
Output Voltage Null
VNULL
No Load (0-100K bits/s)
-250
+250
mV
Input Current (Input Low)
IIL
-20
-
A
Input Current (Input High)
IIH
-10
A
Output Short Circuit Current
(Output High)
IOHSC
Short to GND
-
-80
mA
Output Short Circuit Current
(Output Low)
IOLSC
Short to GND
80
-
mA
Output Impedance
ZO
TA = +25
oC60
90
NOTE:
1. +V = +15V
± 10%, -V = -15V ± 10%, V1 = VREF = 5V ± 5%, unless otherwise specified TA = 0oC to +70oC for HS-3182-5 and
TA = -55
oC to +125oC for HS-3182-8.
HS-3182