參數資料
型號: HOME
英文描述: Home PHY Single-Chip 1/10Mbps Home Networking PHY? - (PDF)
中文描述: 首頁P(yáng)HY的單芯片1/10Mbps家庭網絡物理層? - (PDF格式)
文件頁數: 22/90頁
文件大?。?/td> 743K
代理商: HOME
22
Am79C901A
P R E L I M I N A R Y
BASIC FUNCTIONS
Network Interfaces
The Am79C901A PHY contains an integrated 1 Mbps
home networking PHY and a 10BASE-T PHY. This de-
vice is compliant with the HomePNA specification 1.0
and IEEE 802.3 specification.
The integrated HomePNA transceiver is a physical
layer device that enables data networking at speeds up
to 1 Mbps over existing residential phone wiring regard-
less of topology and without disrupting telephone
(POTS) service.
The integrated Ethernet transceiver is a physical layer
device supporting the IEEE 802.3 standard for
10BASE-T. It provides all of the PHY layer functions re-
quired to support 10 Mbps data transfer speeds. The
10BASE-T PHY supports both half-duplex and
full-duplex operation.
PHY Data Interfaces
The Am79C901A PHY has both GPSI and MII-com-
patible data interfaces. In addition, a special mode,
GM_MODE, allows access to the MDC/MDIO com-
mand and control interface while in the GPSI mode.
For more information, see the
Pin Descriptions
and
the
Detailed Functions
sections.
Reset
There are two different types of RESET operations that
may be performed on the Am79C901A device,
H_RESET or S_RESET. The following is a description
of each type of RESET operation.
H_RESET
Hardware Reset (H_RESET) is a reset operation that
has been initiated by the proper assertion of the
RESET pin of the Am79C901A device. When the
minimum pulse width timing as specified in the
RESET pin description has been satisfied, an inter-
nal reset operation will be performed.
H_RESET will program all of the registers to their
default value.
S_RESET
In a software reset (S_RESET), programming bit 15 of
HPR0 to 1 will reset all the registers in the 1 Mbps
HomePNA PHY (HPRs), and programming bit 15 of
TBR0 to 1 will reset TBR4, TBR7, TBR17, and TBR24
in the 10BASE-T PHY. These bits are self-clearing.
DETAILED FUNCTIONS
GPSI Interface
The seven signals that comprise the GPSI are TXCLK,
TXEN, TXDAT, RXCLK, RXCRS, RXDAT, and CLS. Of
these, only TXEN and TXDAT are inputs to the PHY;
the other five are outputs from the PHY. These signals
behave differently depending on which operation is cur-
rently happening in the PHY. The operations of the
PHY are as follows: Idle (no activity in either direction),
RXPKT (receiving data), and TXPKT (transmitting
data). The subsequent subsections analyze each
GPSI-related state of the PHY in detail.
Figure 1.
Idle State
TXCLK
TXEN
TXDAT
RXCLK
RXCRS
RXDAT
CLS
Note
:
RXCLK and TXCLK are synchronized to the same phase. All other signals are inactive. The two clock
signals toggle for an overall period of 583.3ns (about 1.7 MHz).
22304B-3
相關PDF資料
PDF描述
HP5082-762x 7.6 mm (0.3 inch)/10.9 mm (0.43 inch) Seven Segment Displays
HP5082-765x 7.6 mm (0.3 inch)/10.9 mm (0.43 inch) Seven Segment Displays
HP5082-766x 7.6 mm (0.3 inch)/10.9 mm (0.43 inch) Seven Segment Displays
HP5082-773x 7.6 mm (0.3 inch)/10.9 mm (0.43 inch) Seven Segment Displays
HP5082-775x 7.6 mm (0.3 inch)/10.9 mm (0.43 inch) Seven Segment Displays
相關代理商/技術參數
參數描述
HOMEKTADDONDB 功能描述:AD-ON-BOARD FOR DA14681 HOMEKIT 制造商:dialog semiconductor gmbh 系列:SmartBond? 零件狀態:在售 類型:收發器; 智能低功耗(BLE)藍牙? 4.x 頻率:2.4GHz 配套使用產品/相關產品:DA14681 所含物品:板 標準包裝:1
HOML2225 制造商:Square D by Schneider Electric 功能描述:CIRCUIT BREAKER SUB-FEED LUG
HOMT1515225 制造商:Square D by Schneider Electric 功能描述:MINIATURE CIRCUIT BREAKER 120/240V 15A
HOMT1515240CP 制造商:Square D by Schneider Electric 功能描述:MINIATURE CIRCUIT BREAKER 120/240V 15A
HOMT2020240CP 制造商:Schneider Electric 功能描述:MINIATURE CIRCUIT BREAKER 120/240V 20A