參數資料
型號: GP2W1002YP0F
廠商: Sharp Microelectronics
文件頁數: 9/14頁
文件大?。?/td> 373K
描述: IRDA MODULE 1152KBPS 8SMD
標準包裝: 2,000
系列: *
數據速率: 1.152Mbs(MIR)
電源電壓: 2.7 V ~ 5.5 V
無效電流,標準值@ 25° C: 0.01µA
通信距離,低功率: 20cm,1m
方向: 側視圖
工作溫度: -25°C ~ 85°C
尺寸: 8mm x 3mm x 2.5mm
標準: IrPHY 1.4
關機: *
包裝: 帶卷 (TR)
GP2W1002YP0F
0
1
2
3
4
0
1
2
3
4
(typ.)
Logic I/O levels V
IO
(V)
Fig.7 High level output voltage(VOH) vs Logic I/O levels(VIO)
Sheet No.: E3-A00201EN
?SPAN class="pst GP2W1002YP0F_2589044_0">Notes
(1) When the system (program) is designed, the Turn Around Time shall be secured by considering 200 約 or
  more that is specified to IrDA.
  Then, this Turn Around Time means the time when this device does not temporarily detect the signal light,
  since the transmitted light form the transceiver reaches the detector side of the transceiver.
(2) As it is necessary 100 約 or more (at Ta =25 癈, no input signal) to return from shut-down mode to ready-
  operation mode, please consider this point at the system (program) designing.
  Also, please confirm thoroughly the operation in actual application.
(3) When there is much external disturbing light source is located near this transceiver and the detector face
  resceiver much external disturbing light, there is case that the pulse other than signal output is generated
  as noise on output terminal of this transceiver. Please consider the lay-out and structure to reduce disturbing
  light on the detector face.
(4) In case that this sensor is adopted in IR communication system, please use it according to the signal method
  which is specified by [Serial Infrared Physical Layer Link Specification Version 1.4] published by Infrared
  Data Association. False operation may happen if the different signal method is used.
(5) In circuit designing, make allowance for the degradation of light emitting diode output that results from long
  continuous operation. ( 50 % degradation/5 years)
9
相關PDF資料
PDF描述
GSA.8821.B301111 ANTENNA GSM CELLULAR ADHESIVE MT
GSA.8821.B301721 PENTA BAND GSM I BAR
GSA.8822.A301111 ANTENNA GSM CELLULAR ADHESIVE MT
GW.11.A153 ANT 2.4GHZ 1.8DBI HINGED DIPOLE
GW.15.2113 ANT 2.4GHZ 2DBI HINGED DIPOLE
相關代理商/技術參數
參數描述
GP2W1301YP 制造商:Sharp Microelectronics Corporation 功能描述:IRDA TX/RX 4MBPS 2.7V TO 5.5V - Tape and Reel
GP2W1305YP 制造商:Sharp Microelectronics Corporation 功能描述:
GP2W2001YK 制造商:Sharp Microelectronics Corporation 功能描述:SPECIALTY INTERFACE CIRCUIT, XMA
GP2W2002YK 制造商:SHARP 制造商全稱:Sharp Electrionic Components 功能描述:IrDA Control Infrared Transceiver for Peripheral Type 2
GP2W2003YK 制造商:未知廠家 制造商全稱:未知廠家 功能描述:INFRARED DATA COMMUNICATION DEVICE