- 您現在的位置：買賣IC網 > PDF目錄362752 > EPM1270 (Altera Corporation) JTAG & In-System Programmability PDF資料下載
參數資料
| 型號： | EPM1270 |
| 廠商： | Altera Corporation |
| 英文描述： | JTAG & In-System Programmability |
| 中文描述： | JTAG接口 |
| 文件頁數： | 1/10頁 |
| 文件大小： | 103K |
| 代理商： | EPM1270 |
Altera Corporation
June 2004
Core Version a.b.c variable
3–1
Preliminary
Chapter 3. JTAG & In-System
Programmability
IEEE Std. 1149.1
(JTAG) Boundary
Scan Support
All MAX
II devices provide Joint Test Action Group (JTAG) boundary-
scan test (BST) circuitry that complies with the IEEE Std. 1149.1-2001
specification. JTAG boundary-scan testing can only be performed at any
time after V
CCINT
and all V
CCIO
banks have been fully powered and a
t
CONFIG
amount of time has passed. MAX II devices can also use the JTAG
port for in-system programming together with either the Quartus
II
software or hardware using Programming Object Files (
.pof
), Jam
TM
Standard Test and Programming Language (STAPL) Files (
.jam
) or Jam
Byte-Code Files (
.jbc
).
The JTAG pins support 1.5-V, 1.8-V, 2.5-V, or 3.3-V I/O standards. The
supported voltage level and standard is determined by the V
CCIO
of the
bank where it resides. The dedicated JTAG pins reside in Bank 1 of all
MAX II devices.
MAX II devices support the JTAG instructions shown in
Table 3–1
.
Table 3–1. MAX II JTAG Instructions (Part 1 of 2)
JTAG Instruction
Instruction Code
Description
SAMPLE/PRELOAD
00 0000 0101
Allows a snapshot of signals at the device pins to be captured
and examined during normal device operation, and permits an
initial data pattern to be output at the device pins.
EXTEST
(1)
00 0000 1111
Allows the external circuitry and board-level interconnects to
be tested by forcing a test pattern at the output pins and
capturing test results at the input pins.
BYPASS
11 1111 1111
Places the 1-bit bypass register between the
TDI
and
TDO
pins, which allows the boundary scan test data to pass
synchronously through selected devices to adjacent devices
during normal device operation.
USERCODE
00 0000 0111
Selects the 32-bit
USERCODE
register and places it between
the
TDI
and
TDO
pins, allowing the
USERCODE
to be serially
shifted out of
TDO
. This register defaults to all 1’s if not
specified in the Quartus II software.
IDCODE
00 0000 0110
Selects the
IDCODE
register and places it between
TDI
and
TDO
, allowing the IDCODE to be serially shifted out of
TDO
.
MII51003-1.1
相關PDF資料 |
PDF描述 |
|---|---|
| EPM2210 | JTAG & In-System Programmability |
| EPM240 | JTAG & In-System Programmability |
| EPM570 | JTAG & In-System Programmability |
| EPM3032A | Programmable Logic Device Family |
| EPM3064A | Programmable Logic Device Family |
相關代理商/技術參數 |
參數描述 |
|---|---|
| EPM1270100C5N | 制造商:ALTERA 制造商全稱:Altera Corporation 功能描述:The MAX II family of instant-on, non-volatile CPLDs is based on a 0.18-m, |
| EPM1270F100A | 制造商:ALTERA 制造商全稱:Altera Corporation 功能描述:MAX II Device Family |
| EPM1270F100C | 制造商:ALTERA 制造商全稱:Altera Corporation 功能描述:MAX II Device Family |
| EPM1270F100I | 制造商:ALTERA 制造商全稱:Altera Corporation 功能描述:MAX II Device Family |
| EPM1270F256A5N | 功能描述:CPLD - 復雜可編程邏輯器件 CPLD - MAX II 980 Macro 212 IO RoHS:否 制造商:Lattice 系列: 存儲類型:EEPROM 大電池?cái)?shù)量:128 最大工作頻率:333 MHz 延遲時間:2.7 ns 可編程輸入/輸出端數量:64 工作電源電壓:3.3 V 最大工作溫度:+ 90 C 最小工作溫度:0 C 封裝 / 箱體:TQFP-100 |
發布緊急采購，3分鐘左右您將得到回復。