參數資料
型號： DS28EA00U+T&R
廠商： Maxim Integrated
文件頁數： 19/29頁
文件大小： 328K
描述： IC THERMOMETER 1-WIRE 8-USOP
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 3,000
功能： 溫度計，恒溫計
傳感器類型： 內部
感應溫度： -40°C ~ 85°C
精確度： ±0.5°C（最小值）
拓?fù)洌?/td> 寄存器庫，變簽式暫存器
輸出類型： 數字
輸出警報： 是
輸出風扇： 無
電源電壓： 3 V ~ 5.5 V
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 8-TSSOP，8-MSOP（0.118"，3.00mm 寬）
供應商設備封裝： 8-uMAX
包裝： 帶卷 (TR)
Skip ROM [CCh]
This command can save time in a single-drop bus sys-
tem by allowing the bus master to access the control
functions without providing the 64-bit ROM code. If
more than one slave is present on the bus and, for
example, a read command is issued following the Skip
ROM command, data collision occurs on the bus as
multiple slaves transmit simultaneously (open-drain
pulldowns produce a wired-AND result).
Overdrive-Skip ROM [3Ch]
On a single-drop bus this command can save time by
allowing the bus master to access the control functions
without providing the 64-bit ROM code. Unlike the nor-
mal Skip ROM command, the Overdrive-Skip ROM sets
the DS28EA00 in the overdrive mode (OD = 1). All com-
munication following this command has to occur at
overdrive speed until a reset pulse of minimum 480祍
duration resets all devices on the bus to standard
speed (OD = 0).
When issued on a multidrop bus, this command sets all
overdrive-supporting devices into overdrive mode. To
subsequently address a specific overdrive-supporting
device, a reset pulse at overdrive speed has to be
issued followed by a Match ROM or Search ROM com-
mand sequence. This speeds up the time for the
search process. If more than one slave supporting
overdrive is present on the bus and the Overdrive-Skip
ROM command is followed by a Read command, data
collision occurs on the bus as multiple slaves transmit
simultaneously (open-drain pulldowns produce a wired-
AND result).
Overdrive-Match ROM [69h]
The Overdrive-Match ROM command followed by a
64-bit ROM sequence transmitted at overdrive speed
allows the bus master to address a specific DS28EA00
on a multidrop bus and to simultaneously set it in over-
drive mode. Only the DS28EA00 that exactly matches
the 64-bit ROM sequence responds to the subsequent
control function command. Slaves already in overdrive
mode from a previous Overdrive-Skip ROM or success-
ful Overdrive-Match ROM command remain in over-
drive mode. All overdrive-capable slaves return to
standard speed at the next reset pulse of minimum
480祍 duration. The Overdrive-Match ROM command
can be used with a single device or multiple devices on
the bus.
1-Wire Digital Thermometer with
Sequence Detect and PIO
DS28EA00
Maxim Integrated
19
相關PDF資料
PDF描述
DS3920T-001+ IC CURRENT MIRROR 5:1 SOT23-6
DS4560LS-LO+T IC SWITCH HOT-PLUG 12V 8-SOIC
DS600U+T&R IC SENSOR TEMP 8-USOP
DS620U+ IC THERMOMETER/STAT DIG 8MSOP
DS7505U+T&R IC DGTL THERMOMETER 2WIRE 8-USOP
相關代理商/技術參數
參數描述
DS28EC20 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:DS28EC20_1203
DS28EC20 T 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:DS28EC20_1203
DS28EC20_11 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:20Kb 1-Wire EEPROM
DS28EC20_1203 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:DS28EC20_1203
DS28EC20+ 功能描述:電可擦除可編程只讀存儲器 20Kb 1-Wire 電可擦除可編程只讀存儲器 RoHS:否 制造商:Atmel 存儲容量:2 Kbit 組織:256 B x 8 數據保留:100 yr 最大時鐘頻率:1000 KHz 最大工作電流:6 uA 工作電源電壓:1.7 V to 5.5 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-8
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*