- 您現在的位置：買賣IC網 > PDF目錄379182 > DS2188 T1/CEPT Jitter Attenuator PDF資料下載
參數資料
| 型號： | DS2188 |
| 英文描述： | T1/CEPT Jitter Attenuator |
| 中文描述： | T1/CEPT抖動抑制器 |
| 文件頁數： | 2/11頁 |
| 文件大?。?/td> | 149K |
| 代理商： | DS2188 |
DS2188
2 of 11
If the incoming jitter has excursions greater than 120 UIpp, then the crystal is adjusted to track the short-
term frequency variations of the incoming signal so that there is no loss of data. This adjustment is
accomplished by dividing the 4X crystal by either 3 or 4 instead of 4. When the incoming jitter is
greater than 120 UIpp, the BL pin will transition high. When the incoming jitter returns to less than 120
UIpp, the BL pin will return low.
The jitter attenuator in the DS2188 can be disabled by tying the DJA pin high. When the jitter attenuator
is disabled, the FIFO is bypassed and jitter received at RCLK, RPOS and RNEG is passed through the
DS2188 to RRCLK, RRPOS, and RRNEG. In this situation, the BL pin has no significance and XTAL
OUT will not be coherent with RRCLK.
How to use the DS2188 with Dallas Semiconductor’s other T1 and CEPT line interface parts is illustrated
in Figures 3 through 5. Figure 3 illustrates how to use the DS2188 in the receive path along with a
DS2187 Receive Line Interface. Figure 4 illustrates how to use the DS2188 in the transmit path with the
DS2186 Transmit Line Interface. Also, see DS2188 Application Note, “Operation at Speeds Greater than
E1” for additional information.
BUFFER DEPTH SELECT
The buffer size on the DS2188 can be configured to either 128 or 32 bits via the BDS pin. If BDS is tied
low, then the buffer depth will be 128 bits and hence can handle input jitter up to 120 UIpp without losing
its full attenuation capabilities as is described above in the Over-view. If BDS is tied high, then the
buffer depth is shortened to 32 bits. In this configuration, the DS2188 can handle input jitter up to 28
UIpp without losing its full jitter attenuation capabilities. The user may wish to limit the buffer size to 32
bits in applications where through-put delay is critical or into existing applications that al-ready have 32
bits of buffer space.
RESET
The buffer on the DS2188 is automatically centered on power-up. The user can recenter the 128-bit (or
32-bit) buffer on demand via the
RST
pin. The
RST
pin on the DS2188 is negative-edge triggered. When
this pin transitions from high-to-low, the buffer is recentered. The
RST
pin can be held either high or low
during operation of the DS2188; only a negative going signal will initiate a recentering. In most cases, a
reset of the DS2188 will corrupt data that is currently passing through the buffer.
相關PDF資料 |
PDF描述 |
|---|---|
| DS2196 | Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 |
| DS2196L | Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 |
| DS2196LN | Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 |
| DS21Q43AT | Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 |
| DS21Q43ATN | Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS2188+ | 功能描述:通信集成電路 - 若干 RoHS:否 制造商:Maxim Integrated 類型:Transport Devices 封裝 / 箱體:TECSBGA-256 數據速率:100 Mbps 電源電壓-最大:1.89 V, 3.465 V 電源電壓-最小:1.71 V, 3.135 V 電源電流:50 mA, 225 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝:Tube |
| DS2188N | 功能描述:通信集成電路 - 若干 RoHS:否 制造商:Maxim Integrated 類型:Transport Devices 封裝 / 箱體:TECSBGA-256 數據速率:100 Mbps 電源電壓-最大:1.89 V, 3.465 V 電源電壓-最小:1.71 V, 3.135 V 電源電流:50 mA, 225 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝:Tube |
| DS2188S | 功能描述:通信集成電路 - 若干 RoHS:否 制造商:Maxim Integrated 類型:Transport Devices 封裝 / 箱體:TECSBGA-256 數據速率:100 Mbps 電源電壓-最大:1.89 V, 3.465 V 電源電壓-最小:1.71 V, 3.135 V 電源電流:50 mA, 225 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝:Tube |
| DS2188S/T&R | 功能描述:通信集成電路 - 若干 RoHS:否 制造商:Maxim Integrated 類型:Transport Devices 封裝 / 箱體:TECSBGA-256 數據速率:100 Mbps 電源電壓-最大:1.89 V, 3.465 V 電源電壓-最小:1.71 V, 3.135 V 電源電流:50 mA, 225 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝:Tube |
| DS2188S+ | 功能描述:通信集成電路 - 若干 RoHS:否 制造商:Maxim Integrated 類型:Transport Devices 封裝 / 箱體:TECSBGA-256 數據速率:100 Mbps 電源電壓-最大:1.89 V, 3.465 V 電源電壓-最小:1.71 V, 3.135 V 電源電流:50 mA, 225 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。