- 您現在的位置：買賣IC網 > PDF目錄376947 > DS1976 Shielded Drum Core Inductors PDF資料下載
參數資料
| 型號： | DS1976 |
| 英文描述： | Shielded Drum Core Inductors |
| 中文描述： | 屏蔽鼓核心電感器 |
| 文件頁數： | 3/3頁 |
| 文件大?。?/td> | 61K |
| 代理商： | DS1976 |
Item
Specification
Test Method/Condition
Environmental
Static Humidity
After exposure part remains
within specified electrical
parameters for L, Q and DCR.
Storage Life
After exposure part remains
within specified electrical
parameters for L, Q and DCR.
Moisture Resistance
After exposure, part shall not
have a shorted or open winding.
Per MIL-STD 202 Method 106, ten 24 hour cycles at +25°C to
+65°C at 80 to 95% R.H. During any of the first 9 cycles, inductors
are revolved from the chamber and exposed to -10°C for 3 hours.
Allow parts to dry for 2 hours before measurements are taken.
Temperature Cycle
After exposure part remains
within specified electrical
parameters for L, Q and DCR.
10 cycles (Air to Air) 1 cycle shall consist of:
30 minutes exposure to +85°C
30 minutes exposure to -40°C
Allow 20 minutes transition between extremes.
Temperature Shock
After exposure part remains
within specified electrical
parameters for L, Q and DCR.
10 cycles (Air to Air) 1 cycle shall consist of:
30 minutes exposure to -45°C
30 minutes exposure to +125°C
15 seconds maximum transition between temperatures
General
Storage Temperature
Range
-40°C to +85°C
Operating Temperature
Range
-40°C to +85°C
Flammability
IEC 695-2-2
Withstands needle-flame test
Other
Vibration
After exposure part remains
within specified electrical
parameters for L, Q and DCR.
Inductors shall be randomly vibrated per NAVMAT P9492
profile. Samples shall be subjected to 0.04G/Hz for a
minimum of 15 minutes per axis, for each of the three axes.
Mechanical Shock
After exposure part remains
within specified electrical
parameters for L, Q and DCR.
Test per MIL-STD 202 method 213 test condition A, test
mounted samples 3 axes, 6 times, totaling 18 shocks.
(50Gs, 11ms, half-sine).
Solderability
Wetting shall cover 90% minimum
of each termination
Component Adhesion
(Push Test)
4 pounds
Apply and measure force with a digital force gauge set.
Resistance to Solvent
No sign of degradation in
appearance or marking detail.
Withstands 6 minutes of alcohol.
Withstands 3 minutes forced spray Freon TMS
Load Life
After exposure, part shall not
have a shorted or open winding.
Parts to be stored at 110°C for 1000 hours with rated current
applied. Parts to be tested at: start, 500 and 1000 hours. Allow
2 hours at room temperature before testing.
Series
Revision
B
Sheet 3 of 3
Subject parts to an environment of +50°C 90 to 100% R.H. for 46 to 50
hours. After exposure, allow parts to dry for 2 hours before
measurements are taken.
Expose parts to an environment of +50°C with 90 to 95% R.H. for 100
hours. After exposure, allow parts to dry for 2 hours before
measurements are taken.
DS SERIES
For Print Distribution to Customers
Dip pads in RMA flux, 63/37 solder (Sn/Pb) at 232°C for 5 seconds ±2
seconds.
相關PDF資料 |
PDF描述 |
|---|---|
| DS6630 | Shielded Drum Core Inductors |
| DS1200N | NOVRAM|128X8|CMOS|DIP|10PIN|PLASTIC |
| DS1200S | NOVRAM|128X8|CMOS|SOP|16PIN|PLASTIC |
| DS1200SN | NOVRAM|128X8|CMOS|SOP|16PIN|PLASTIC |
| DS1201 | NOVRAM|128X8|CMOS|MODULE|5PIN|PLASTIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS1976-100M | 功能描述:INDUCTOR 10UH 3.6A 20% 1976 RoHS:否 類別:電感器，線圈，扼流圈 >> 固定式 系列:DS1976 標準包裝:500 系列:1331 電感:1.2µH 電流:247mA 電流 - 飽和:247mA 電流 - 溫升:- 類型:鐵芯體 容差:±10% 屏蔽:屏蔽 DC 電阻(DCR):最大 730 毫歐 Q因子@頻率:40 @ 7.9MHz 頻率 - 自諧振:130MHz 材料 - 芯體:鐵 封裝/外殼:0.312" L x 0.115" W x 0.135" H（7.94mm x 2.92mm x 3.43mm） 安裝類型:表面貼裝 包裝:帶卷 (TR) 工作溫度:-55°C ~ 105°C 頻率 - 測試:7.9MHz |
| DS1976101M | 制造商: 功能描述: 制造商:undefined 功能描述: |
| DS1976-101M | 功能描述:INDUCTOR 100UH 1.7A 20% 1976 RoHS:否 類別:電感器，線圈，扼流圈 >> 固定式 系列:DS1976 標準包裝:500 系列:1331 電感:1.2µH 電流:247mA 電流 - 飽和:247mA 電流 - 溫升:- 類型:鐵芯體 容差:±10% 屏蔽:屏蔽 DC 電阻(DCR):最大 730 毫歐 Q因子@頻率:40 @ 7.9MHz 頻率 - 自諧振:130MHz 材料 - 芯體:鐵 封裝/外殼:0.312" L x 0.115" W x 0.135" H（7.94mm x 2.92mm x 3.43mm） 安裝類型:表面貼裝 包裝:帶卷 (TR) 工作溫度:-55°C ~ 105°C 頻率 - 測試:7.9MHz |
| DS1976-102M | 功能描述:INDUCTOR 1000UH .53A 20% 1976 RoHS:否 類別:電感器，線圈，扼流圈 >> 固定式 系列:DS1976 標準包裝:500 系列:1331 電感:1.2µH 電流:247mA 電流 - 飽和:247mA 電流 - 溫升:- 類型:鐵芯體 容差:±10% 屏蔽:屏蔽 DC 電阻(DCR):最大 730 毫歐 Q因子@頻率:40 @ 7.9MHz 頻率 - 自諧振:130MHz 材料 - 芯體:鐵 封裝/外殼:0.312" L x 0.115" W x 0.135" H（7.94mm x 2.92mm x 3.43mm） 安裝類型:表面貼裝 包裝:帶卷 (TR) 工作溫度:-55°C ~ 105°C 頻率 - 測試:7.9MHz |
| DS1976-102M-B | 制造商:TE Connectivity 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。