
1
DESCRIPTION
The single output DGP30 Series is designed to accept an extended
2:1 input voltage range for use in industrial and telecom
applications. The output of the converter is electrically isolated,
thereby allowing the output to be configured as a positive or
negative output voltage. For additional system utility output Trim
and Remote ON/OFF are featured. Overcurrent protection,
overtemperature protection, and output overvoltage transient
protection allow safe, reliable operation.
FEATURES
Remote ON/OFF and TRIM
Low OFF Current
Overcurrent and Overtemperature Protection
Efficiencies to 86%
Transient Output Overvoltage Protection
1544V Isolation
Five-Side Shielded Case
Extended Range Input (2:1)
DGP30 SERIES
SINGLE OUTPUT
Mechanical tolerances unless otherwise noted:
X.XX dimensions: ±0.020 inches
X.XXX dimensions: ±0.005 inches
NOTES
(1)
All parameters measured at Tc = 25°C, nominal input voltage and full rated load unless otherwise noted.
Refer to the Technical Reference Section for the definition of terms, measurement circuits and other
information.
ON/OFF pin is referenced to pin 2, -Input. See DGP30 Series Application Notes for the specific
requirements of this feature.
The Case is electrically connected to Pin 1, +Input.
Full output trim range may not be available at minimum input voltage and full load. Full trim is
guaranteed from minimum input voltage, plus 5%, and full load.
The case thermal impedance is specified as the case temperature rise over ambient per package watt
dissipated.
(2)
(3)
(4)
(5)
1
BOTTOM VIEW
2.02
(51.31)
SIDE VIEW
0
0
0
0.000
0.100
(
0.040 (1.02) DIA
6 PLACES
0
1.62
(41.15)
(
2
3
7
6
5
1
0
0.700
(17.78)
(0.300
(0.600
(7.62)
0.31
(7.9)
(
(
Rev. 04/2000