參數資料
型號： CYWUSB6934
廠商： Cypress Semiconductor Corp.
英文描述： Sound/Security Multiconductor Cable; Number of Conductors:2; Conductor Size AWG:18; No. Strands x Strand Size:7 x 26; Jacket Material:Polyvinylchloride (PVC); Leaded Process Compatible:Yes; Conductor Material:Copper RoHS Compliant: Yes
中文描述： 個WirelessUSB LS的2.4GHz直接序列擴頻無線電芯片
文件頁數： 15/30頁
文件大小： 305K
代理商： CYWUSB6934
CYWUSB6932
CYWUSB6934
Document 38-16007 Rev. *G
Page 15 of 30
Note:
5.
All status bits are set and readable in the registers regardless of IRQ enable status. This allows a polling scheme to be implemented without enabling IRQs. The
status bits are affected by the TX Enable and RX Enable (Reg 0x03, bits 7:6). For example, the transmit status will read 0 if the IC is not in transmit mode. These
registers are read-only.
Addr: 0x0E
REG_TX_INT_STAT
Default: 0x00
7
6
5
4
3
2
1
0
Reserved
Underflow
Overflow
Done
Empty
Figure 7-13. Transmit SERDES Interrupt Status
Bit
7:4
3
Name
Reserved
Underflow
Description
These bits are reserved. This register is read-only.
The Underflow bit is used to signal when an underflow condition associated with the Transmit SERDES Data register (Reg
0x0F) has occurred.
1 = Underflow Interrupt pending.
0 = No Underflow Interrupt pending.
This IRQ will assert during an underflow condition to the Transmit SERDES Data register (Reg 0x0F). An underflow occurs
when the transmitter is ready to sample transmit data, but there is no data ready in the Transmit SERDES Data register (Reg
0x0F). This will only assert after the transmitter has transmitted at least one bit. This bit is cleared by reading the Transmit
Interrupt Status register (Reg 0x0E).
The Overflow bit is used to signal when an overflow condition associated with the Transmit SERDES Data register (0x0F)
has occurred.
1 = Overflow Interrupt pending.
0 = No Overflow Interrupt pending.
This IRQ will assert during an overflow condition to the Transmit SERDES Data register (Reg 0x0F). An overflow occurs
when the new data is loaded into the Transmit SERDES Data register (Reg 0x0F) before the previous data has been sent.
This bit is cleared by reading the Transmit Interrupt Status register (Reg 0x0E).
The Done bit is used to signal the end of a data transmission.
1 = Done Interrupt pending.
0 = No Done Interrupt pending.
This IRQ will assert when the data is finished sending a byte of data and there is no more data to be sent. This will only assert
after the transmitter has transmitted as least one bit. This bit is cleared by reading the Transmit Interrupt Status register (Reg
0x0E)
The Empty bit is used to signal when
the Transmit SERDES Data register (Reg 0x0F) has been emptied.
1 = Empty Interrupt pending.
0 = No Empty Interrupt pending.
This IRQ will assert when the transmit serdes is empty. When this IRQ is asserted it is ok to write to the Transmit SERDES
Data register (Reg 0x0F). Writing the Transmit SERDES Data register (Reg 0x0F) will clear this IRQ. It will be set when the
data is loaded into the transmitter, and it is ok to write new data.
2
Overflow
1
Done
0
Empty
相關PDF資料
PDF描述
CYWUSB6934-48LFXC Multiconductor Cable; Number of Conductors:2; Conductor Size AWG:18; No. Strands x Strand Size:7 x 26; Jacket Material:Polyvinylchloride (PVC); Leaded Process Compatible:Yes; Capacitance:30pF/ft; Conductor Material:Copper RoHS Compliant: Yes
CYWUSB6935-48LFXC WirelessUSB LRTM 2.4-GHz DSSS Radio SoC
CYWUSB6935-48LFXI WirelessUSB LRTM 2.4-GHz DSSS Radio SoC
CYWUSB6941 WirelessUSB EX Radio
CYWUSB6941-42BAC WirelessUSB EX Radio
相關代理商/技術參數
參數描述
CYWUSB6934-28SEC 功能描述:IC WIRELESS USB 2.4GHZ 28-SOIC RoHS:否 類別:RF/IF 和 RFID >> RF 收發器 系列:WirelessUSB™ 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:30 系列:- 頻率:4.9GHz ~ 5.9GHz 數據傳輸率 - 最大:54Mbps 調制或協議:* 應用:* 功率 - 輸出:-3dBm 靈敏度:- 電源電壓:2.7 V ~ 3.6 V 電流 - 接收:* 電流 - 傳輸:* 數據接口:PCB，表面貼裝 存儲容量:- 天線連接器:PCB，表面貼裝 工作溫度:-25°C ~ 85°C 封裝/外殼:68-TQFN 裸露焊盤 包裝:管件
CYWUSB6934-48LFC 功能描述:IC WIRELESS USB 2.4GHZ 48VQFN RoHS:否 類別:RF/IF 和 RFID >> RF 收發器 系列:WirelessUSB™ 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:30 系列:- 頻率:4.9GHz ~ 5.9GHz 數據傳輸率 - 最大:54Mbps 調制或協議:* 應用:* 功率 - 輸出:-3dBm 靈敏度:- 電源電壓:2.7 V ~ 3.6 V 電流 - 接收:* 電流 - 傳輸:* 數據接口:PCB，表面貼裝 存儲容量:- 天線連接器:PCB，表面貼裝 工作溫度:-25°C ~ 85°C 封裝/外殼:68-TQFN 裸露焊盤 包裝:管件
CYWUSB6934-48LFXC 功能描述:射頻接收器 Tranciever COM RoHS:否 制造商:Skyworks Solutions, Inc. 類型:GPS Receiver 封裝 / 箱體:QFN-24 工作頻率:4.092 MHz 工作電源電壓:3.3 V 封裝:Reel
CYWUSB6934-48LTXC 功能描述:射頻收發器 2.4 GHz Wireless USB RoHS:否 制造商:Atmel 頻率范圍:2322 MHz to 2527 MHz 最大數據速率:2000 Kbps 調制格式:OQPSK 輸出功率:4 dBm 類型: 工作電源電壓:1.8 V to 3.6 V 最大工作溫度:+ 85 C 接口類型:SPI 封裝 / 箱體:QFN-32 封裝:Tray
CYWUSB6935 制造商:CYPRESS 制造商全稱:Cypress Semiconductor 功能描述:WirelessUSB LRTM 2.4-GHz DSSS Radio SoC
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*