參數資料
型號： CY7C63823
廠商： Cypress Semiconductor Corp.
英文描述： enCoRe II Low-Speed USB Peripheral Controller(enCoRe II低速USB外設控制器)
中文描述： enCoRe II還低速USB外設控制器（enCoRe II還低速的USB外設控制器）
文件頁數： 9/74頁
文件大?。?/td> 1441K
代理商： CY7C63823
CY7C63310
CY7C638xx
Document 38-08035 Rev. *I
Page 9 of 74
7.2.4
The result of an instruction using this addressing mode is
placed within either the RAM memory space or the register
space. Operand 1 is an address that points to the location of
the result. The source for the instruction is either the A register
or the X register, which is specified as part of the instruction
opcode. Arithmetic instructions require two sources; the
second source is the location specified by Operand 1. Instruc-
tions using this addressing mode are two bytes in length.
Destination Direct
Examples
7.2.5
The result of an instruction using this addressing mode is
placed within either the RAM memory space or the register
space. Operand 1 is added to the X register forming the
address that points to the location of the result. The source for
the instruction is the A register. Arithmetic instructions require
two sources; the second source is the location specified by
Operand 1 added with the X register. Instructions using this
addressing mode are two bytes in length.
Destination Indexed
Example
7.2.6
The result of an instruction using this addressing mode is
placed within either the RAM memory space or the register
space. Operand 1 is the address of the result. The source for
the instruction is Operand 2, which is an immediate value.
Arithmetic instructions require two sources; the second source
Destination Direct Source Immediate
is the location specified by Operand 1. Instructions using this
addressing mode are three bytes in length.
Examples
7.2.7
The result of an instruction using this addressing mode is
placed within either the RAM memory space or the register
space. Operand 1 is added to the X register to form the
address of the result. The source for the instruction is Operand
2, which is an immediate value. Arithmetic instructions require
two sources; the second source is the location specified by
Operand 1 added with the X register. Instructions using this
addressing mode are three bytes in length.
Destination Indexed Source Immediate
Examples
7.2.8
The result of an instruction using this addressing mode is
placed within the RAM memory. Operand 1 is the address of
the result. Operand 2 is an address that points to a location in
the RAM memory that is the source for the instruction. This
addressing mode is only valid on the MOV instruction. The
instruction using this addressing mode is three bytes in length.
Destination Direct Source Direct
Table 7-10. Destination Direct
Opcode
Operand 1
Instruction
Destination Address
ADD
[7],
A
;In this case, the value in; the memory
location at; address 7 is added with
the; Accumulator, and the result; is
placed in the memory; location at
address 7. The; Accumulator is
unchanged.
;In this case, the Accumulator is
moved to the register space location
at address 8. The Accumulator is
unchanged.
MOV
REG[8],
A
Table 7-11. Destination Indexed
Opcode
Operand 1
Instruction
Destination Index
ADD
[X+7],
A
;In this case, the value in the; memory
location at address X+7; is added with the
Accumulator,; and the result is placed in;
the memory location at address; x+7. The
Accumulator is; unchanged.
Table 7-12. Destination Direct Source Immediate
Opcode
Instruction
Operand 1
Operand 2
Immediate Value
Destination Address
ADD
[7],
5
;In this case, value in the memory location
at address 7 is added to the immediate
value of 5, and the result is placed in
the
memory location at address 7.
;In this case, the immediate; value of 6 is
moved into the; register space location at;
address 8.
MOV REG[8],
6
Table 7-13. Destination Indexed Source Immediate
Opcode
Instruction
Operand 1
Destination Index
Operand 2
Immediate Value
ADD
[X+7],
5
;In this case, the value in; the mem-
ory location at; address X+7 is
added with; the immediate value of
5,; and the result is placed; in the
memory location at; address X+7.
;In this case, the immediate value of
6 is moved; into the location in the;
register space at; address X+8.
MOV
REG[X+8],
6
Table 7-14. Destination Direct Source Direct
Opcode
Instruction
Operand 1
Operand 2
Source Address
Destination Address
相關PDF資料
PDF描述
CY7C63813 enCoRe II Low-Speed USB Peripheral Controller(enCoRe II低速USB外設控制器)
CY7C63833 enCoRe II Low-Speed USB Peripheral Controller(enCoRe II低速USB外設控制器)
CY7C65640-LFXC TetraHub High-speed USB Hub Controller
CY7C65640 TetraHub High-speed USB Hub Controller
CY7C65640-LFC TetraHub High-speed USB Hub Controller
相關代理商/技術參數
參數描述
CY7C63823-3XWC 制造商:Cypress Semiconductor 功能描述:USB - Bulk 制造商:Cypress Semiconductor 功能描述:Bulk / USB Low-Speed Peripherals
CY7C638234-SXC 功能描述:IC USB CONTROLLERS RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN（6x6） 包裝:* 其它名稱:Q6396337A
CY7C638235-SXC 制造商:Rochester Electronics LLC 功能描述: 制造商:Cypress Semiconductor 功能描述:
CY7C63823-PXC 功能描述:IC USB PERIPHERAL CTRLR 24-DIP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:CY7C 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN（6x6） 包裝:* 其它名稱:Q6396337A
CY7C63823-QXC 功能描述:USB 接口集成電路 USB Peripheral Cntrl 8K/256 24-QSOP RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*